TRANSPORTATION
12Pages

WINDSCREEN SEALANTS Medium viscosity adhesive for windscreen • Tixotropic, high cohesion, intermediate open time, suitable for windscreen, even high dimensioned. • Excellent adhesion on to sealant residues in vehicle production. • Solventless and isocyanates free, safe in use for both driver and operator. • Excellent primerless adhesion to glass with ceramic coating. • Adhesion on to a wide range of substrates. • Excellent electrical insulation. • Very good UV rays resistance in a wide temperature range. • Easy to wipe, virtually no schrinkage. • Very good extrudability at both low and high...

TECHNICAL DATA MS SCREEN MS SCREEN H MS SCREEN HL MS SCREEN HL 90 MS GLAZING Maximum tensile strength (DIN 53504) : 3 - 3,5 MPa 3 MPa 3 MPa 3 MPa 2,5 MPa Tear resistance (ASTM D 624-73) : 16 - 18 N/mm 18 N/mm 20 N/mm 18 N/mm 10 N/mm Skin formation time (20°C 50% R.H.) : 6 min.approx. 6 min.approx. 15 min.approx. 35 min.approx. 15 min.approx. Drive-away time (FMVSS212 - 2 AIRBAG) : - 45 min. 60 min. - - Values given in this table must not be considered as specifications PRODUCT CODE COLOUR PACKAGING pcs./box MS SCREEN 1004117 black 290 ml. cartridge 24 MS SCREEN 1004206 black 600 ml. sausage...

STRUCTURAL SEALANTS High performance structural adhesive-sealant • Rapid progression of the curing, easy to apply. • Soon overpaintable after skin formation. • High tensile strength. • Excellent resistance to hard mechanical stress. • Very good primerless adhesion on to a wide range of materials. • High UV rays and weather resistance. • Solventless and isocyanates free, virtually no schrinkage. • MS Super has been tested and classified by LAPI according to: CSE RF 2/75/A (UNI 8457) - RF 3/77 (UNI 9174) AFNOR NF X 10-702-2 (1994) NF X 70-100 (1986) - MIP004 (1998) NF F 16-101 (1988) ISO...

High performance sealant • Easy application, workability and smoothing. • For high dimension sealing. • Very good functional and finishing properties. • After cure it can be overpainted with powder systems. • Tixotropic, good primerless adhesion to a wide range of materials. • Excellent UV rays and weather resistance. • Solventless and isocyanates free, virtually no shrinkage. 600 ml. foil packs and 25 Kg. drums available on request. Multipurpose sealant • Easy apllication and workability, overpaintable in a few minutes. • High elastic performance. • High stress and deform resistance. •...

SPECIAL SEALANTS MS TECHNO FR Fire resistant adhesive/sealant • Low flame spread, hazardous substances free in case of fire. • Certified according to EN 45545-2:2013 in the railway sector. • Thixotropic, the product can be applied up-right down. • Isocyanate free, solventless, after dry almost no shrinkage. CODE 25 Kg. drums available on request. TECHNICAL DATA Specific gravity : Shore A Hardness : 100% Modulus (DIN 53504) : Maximum tensile strength (DIN 53504) : Elongation at break (DIN 53504) : Tear resistance (ASTM D 624-73) : Skin formation time (20°C 50% R.H.) : Curing time (20°C 50%...

SPECIAL SEALANTS Gasket forming sealant for high temperatures • Silicone sealant, neutral cure, for engines and mechanical coupling. • Excellent heat resistance up to 260 °C for long periods and up to 315° for short exposures. • High filling property, to reduce joining imperfections of the surfaces. • Non-corrosive on to electrical and soft parts to be joined. S100 FL Multi purpose gasket forming sealant • Not hardening repositionable elastoplastic sealant. • 100% water barrier and 100% steam/humidity barrier. • Suitable for inspectable/removable sealing. • Excellent low temperatures...

ADHESIVES AND RESINS Adhesive for resilient and rubber flooring • Water based, easy to use. • One surface must be absorbing. • When dried, it forms a flexible, not rigid film. • In case of non-absorbent surfaces we recommend MS SPRAY F. Z.PREN Adhesive for spatula for laminates and coating • Solvent based, it must be applied on to both surfaces to be joined. • Contact adhesive, very good green strength. • Suitable for forming, flaps and curvatures covering. 9901 HT / HTS Adhesives by brush (HT)/spray (HTS) for covering • Solvent based, it must be applied on to both surfaces to be joined. •...

ADHESIVES AND RESINS Z.FIX 500 Epoxy structural adhesive • Two part, thixotropic slightly slumping. • Low curing time (pot life 45'/150'). • High tensile strength 180/200 kg cm² (aluminium) suitable for fixing and solid constructions. • Excellent mechanical and compression resistance, it can be use as filler. • Excellent chemical aggression and continuous immersion resistance. ARTICLE Z.FIX BASE Epoxy fluid resin • Two part, easy to arrange. • Self-levelling, excellent wetting, easy to apply. • It can be added with specific charges. • High strength and resistant bonding. • Excellent...

TAPES AND ACCESSORIES Z.STRIP SI/42 CARAVAN Self adhesive sealing tape white • High tack pre-formed butyl sealing strip. • Up-right down application. • High resistance to compression. • Non yellowing. • Not hardening, permanently elastoplastic. • 100% water barrier and 100% steam barrier. CODE Elastoplastic sealing strip, black colour • Pre-formed butyl sealing strip. • Up-right down application. • Suitable for vacuum-processing at high temperature. • 100% water barrier and 100% steam barrier. COLOUR

FILL STIK FLEXY FILL STIK MEGA FILLING FOAMS Elastic foam for thermal/acoustic insulation • Elastic expanded foam. • Excellent thermal insulation values = 0,035 W/(m.K) • High acoustic insulation values: Rs,w for a 10 mm. joint = 63 dB Rs,w for a 20 mm. joint = 64 dB CODE COLOUR PACKAGING Pcs./box Polyurethane foam for professional use • High yield about 40 lt. • Semi rigid and predominantly closed-cell structure for maximum performance. • High quality valve for storage stability up to 18 months. CODE COLOUR PACKAGING Pcs./box High performance B1 foam • High yield about 40 lt. • Fire...