FOOTWEAR ADHESIVE
28Pages

FRATELLI ZUCCHINI Fratelli Zucchini was born in 1930, and starting from 1950’s is specialized in the production of adhesives and sealants for any application field, from footwear to buildings, from automotive to window frames, from boats to household appliances. Since the beginning, a particular attention was focused on Footwear Adhesives, with a whole Department completely dedicated to this sector; today we can boast references among the most important names of Made in Italy, and export relationships worldwide. Fratelli Zucchini does not mean just “glue”, but Gluing Solutions: our strength...

FOOTWEAR PRODUCTS Our contribution to the footwear market for a complete answer to every problem • experience and constant commitment to research • long term quality and fine performance • ability to sense the needs of the customer • expert and efficient technical assistance • the largest range of adhesives, primers and auxiliaries NATURAL RUBBER ADHESIVES 12 WATER BASED ADHESIVES 13-14-15 SOLVENTS - THINNERS - VULCANIZING AGENTS 17 ACCESSORIES & OTHERS 18

The resin content gives them a yellow color, from light amber to pale yellow or dark amber. They allow cold bonding of natural materials and, sometimes, of vulcanized rubbers. They are NOT suitable for gluing oily leathers, for which polyurethane adhesives are recommended. % SOLIDS VISCOSITY CONTENT mPas CLOSING ROOM ASSEMBLY SOLE / UPPER BONDING LASTING OPERATIONS - 7 -

P O LY C H LO R O P R ENE A DHESIV ES The resin content gives them a yellow color, from light amber to pale yellow or dark amber. They allow cold bonding of natural materials and, sometimes, of vulcanized rubbers. They are NOT suitable for gluing oily leathers, for which polyurethane adhesives are recommended. % SOLIDS VISCOSITY CONTENT mPas one-part adhesive for closing room assembly, high tack, long open time, clear and not staining, it doesn’t stiffen the substrates one-part adhesive for closing room assembly, very prolonged tack, long open time, clear and not staining, it doesn’t...

POLYURETHANE ADHESIVES Polyurethane adhesives are suitable for bonding a wide range of materials, also synthetics and oily leathers. This bonding requires heating reactivation. % SOLIDS VISCOSITY CONTENT mPas one-part adhesive for bonding synthetics both at cold and at hot one-part adhesive, high green strength and good hot tack, resistant to leather grease, PVC plasticizers and water. Particularly suitable for sole pre-treatment one-part adhesive, high green strength and good hot tack, resistant to leather grease, PVC plasticizers and water. 15,5-16,5 Available also in F version, suitable...

POLYURETHANE ADHESIVES Polyurethane adhesives are suitable for bonding a wide range of materials, also synthetics and oily leathers. This bonding requires heating reactivation. % SOLIDS VISCOSITY CONTENT mPas two-part adhesive with high penetration onto porous substrates, high hot tack, resistant to leather grease, PVC plasticizers and water. Particularly suitable for bonding low hardness rubber soles one-part adhesive with good hot tack and high green strength, resistant to leather grease, PVC plasticizers and water. It can be applied by roller spreader for uppers. Suitable for PVC sole...

584/NS adhesive formulated for bonding polystirene foam, and therefore suitable for those materials, which can be easily damaged by solvent. It can be used at service temperature range from -20°C to + 60°C. Available also in S (spray) version solution of synthetic resins specific for treating leather covers of polystirene heels by direct injection. EL version, more elastic and flexible, is particularly suitable for high bended surfaces. White SD/14/EL 35-37 600-800

SOLVENT BASED NATURAL RUBBER ADHESIVES Adhesives for closing room assembly, particularly suitable for lining/upper bonding, do not modify the flexibility of bonded materials, non-aggressive to synthetic or leather PRODUCT % SOLIDS VISCOSITY CONTENT mPas 3500-5000 light adhesive for inner assembly, permanently soft adhesive for closing room assembly, permanently soft, high tack, long open time adhesive for closing room assembly, permanently soft, high tack, long open time adhesive for closing room assembly, permanently soft, high tack, long open time WATER BASED NATURAL RUBBER ADHESIVES...

WATER BASED ADHESIVES What does water based adhesive mean? Water based adhesives are polyurethane or polychloroprene resins in water dispersion. Bonding takes place by water evaporation, therefore it takes a bit longer than with solvent based products (above all in case of not absorbing or waterproof materials); however the difference disappears in presence of ovens on the conveyor or in warm environments. The dispersion is white, turning transparent when drying. Why should you choose a water based adhesive? The yield of a water based adhesive can be more than twice compared to a solvent...

suitable for bonding leather, fabrics, woven-non Z TEX 4427 woven, felt, and foam to wood, polyurethane, foamed 53-56 50 <3 specific for bonding leather or synthetic uppers to leather lining, fast setting Z TEX4756/LBS Z TEX 4756/P contact adhesive suitable for upper/lining bonding, on both sides, long open time, high cold tack, fast setting, high resistance to hot and dry climate (80°C) when completely dry, good resistance to ageing

low viscosity primer for leather, two-part, it improves the Z TEX 9628 tear strength of leather, compatible with solvent based PU adhesives Z TEX 9629 adhesive for heat sealing the 45° cuts of moccasins one-part adhesive suitable for bonding at hot or cold, leather Z TEX 9630 and synthetic linings and insoles, perfectly crystal-clear, it can 34-37 be applied by roller machine medium viscosity adhesive for leather and synthetics, two-part medium/high viscoity adhesive for leather and synthetics, one-part, high temperature and hydrolysis resistance CLOSING ROOM ASSEMBLY SOLE / UPPER BONDING -...