*mydirectindustry

Catalogs
Fratelli Giacomello
Stainless steel electromagnetic level indicators with one contact and 1/8” gas connection.

Stainless steel electromagnetic level indicators with one contact and 1/8” gas connection.

Product catalog summary

Overview: The document describes stainless steel electromagnetic level indicators designed for use in chemical, pharmaceutical, and food industries. These indicators are compatible with solvents, thinners, and other liquids that do not react with stainless steel.

Specifications: The indicators are made entirely of stainless steel and feature a 1/8” GAS connection. They are equipped with a Reed switch that activates when the float encounters it at pre-set distances, allowing for the transmission of signals or disconnection of electrical equipment.

Operation: The float within the indicator interacts with a magnet to open or close a contact, enabling the sending of luminous or acoustic signals. The contact can be inverted from normally closed (N.C.) to normally open (N.O.) by removing the bottom stop and flipping the float.

Installation: The indicator must be installed vertically, with the float at least 35mm away from ferrous surfaces to ensure proper operation.

Electrical Characteristics: The device supports a maximum power of 50 W, a current strength of 0.5 A, and operates at voltages up to 200 VDC and 240 VAC. It has an IP65 protection rating.

Materials and Models: The document lists two models: IEG-INOX-FDSA 611 DA 03 made from AISI 316 and IEG-INOX-FDSA 011 DA 03 made from AISI 304.

Important Notes: Ensure proper fitting and installation to maintain functionality and safety. The lead wire length is 30 cm, and the device is designed to operate within a temperature range specified in the document.

Catalog excerpts

Stainless steel electromagnetic level indicators with one contact and 1/8” gas connection.-1

tr.row {} td.cell {} div.block {} div.paragraph {}

Open the catalog to page 1

Stainless steel electromagnetic level indicators with one contact and 1/8” gas connection.-2

I I I I I I I E E E E E E E G G G G G G G - S S S S S S S / / / / / / / S S S S S S S T T T T T T T E E E E E E E E E E E E E E L L L L L L L - F F F F F F F D D D D D D D - S S S S S S S A A A A A A A > STAINLESS STEEL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/8 GAS CONNECTION USE: Entirely in stainless steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries. Suitable for solvents, thinners and all liquids compatible with stainless steel. OPERATION: When the oat of the indicator encounters the Reed switch incorporated in the...

Open the catalog to page 2

All Fratelli Giacomello catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list