SMALL LEVELS Levels to be in place to monitor point.

RL/L LEVEL SWITCH POLYAMIDE 11 / 12 OR PVDF The level switch in question is unique for its practicality and safety. Its compact size allows the user to position the level switch in the most difficult places. Like the Side Rapid Level, also this level switch is inserted directly in the place to be controlled. The contacts are N.O. or N.C. in absence of liquid (reversibility is obtained by turning the level 180°), or with exchange on request. Its composition in Polyamide 11/12 makes the level switch resistant to aggressive liquids, brake fluids, etc., whereas, it is not suitable for liquids containing...

IEG-FCH5 SIDE ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/2” NPT CONNECTION USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks compatible with the material of the level indicator. OPERATION: When the float of the indicator approaches the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical equipment connected to it. FITTING: The indicator must be fitted in the side...

IEG-FCH2 ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND SIDE USE WITH PRESS-FIT CONNECTION USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks compatible with the material of the level indicator. OPERATION: When the float of the indicator approaches the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical equipment connected to it. FITTING: The indicator must be fitted in...

IEG-FCV3 ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/8” GAS CONNECTION USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. OPERATION: When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical equipment connected to it. LEAD WIRE 30cm 1/8”...

IEG-FCH1 SIDE ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND M12 x 1.5 CONNECTION USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks compatible with the material of the level indicator. OPERATION: When the float of the indicator approaches the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical equipment connected to it. FITTING: The indicator must be fitted in the side...

ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1 /8" GAS THREAD IEG-S1M/F IEG-S2M/F USE: Madetoensure, with maximum safety, the minimum ormaximum level of liquids intanksand hydraulic power packs containing mineral oils with viscosity not higher than 80°E; they are also suitable for gas oil and all other non-corrosive and inflammable liquids. The IEG-1 P range is particularly suitable for water and oxidising liquids. OPERATION: When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes,...

IEG-INOX-FD-SA STAINLESS STEEL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/8” GAS CONNECTION USE: Entirely in stainless steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries. Suitable for solvents, thinners and all liquids compatible with stainless steel. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or...

IEG-INOX-FD 3061 STAINLESS STEEL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/8” GAS CONNECTION USE: Entirely in stainless steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries. Suitable for solvents, thinners and all liquids compatible with stainless steel. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal...

IEG-INOX-FD 3062 STAINLESS STEEL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND 1/8” GAS CONNECTION USE: Entirely in stainless steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries. Suitable for solvents, thinners and all liquids compatible with stainless steel. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float, opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal...

IEG-INOX 1/8 S/STEEL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT USE: Entirely in AISI316 stain less steel, they are suitable for use in the production processes of chemical, pharmaceutical and food industries. Suitable for solvents, thinners and all liquids compatible with AISI 316 stainless steel. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distance, the contact is activated by the magnet housed in the float and opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating...