RAPID LEVEL Patented level switches with unique characteristics.

RAPID LEVEL PATENTED LEVEL SWITCHES WITH UNIQUE CHARACTERISTICS ULTRASONIC WELDING FIXING SCREWS SEAT BODY UNION S/STEEL CONTROL ROD * The required length can be obtained simply by cutting the steel rod, using an ordinary pipe cutter; or the switching point can be varied by using a float with through hole allowing the required liquid control point to be modified whenever necessary. * It can be used for dirty liquids, water, petroleum, cutting oils, and tolerates the presence of metal and ferrous particles, since the float does not hold a magnet and is integral with the rod. * One float can operate...

RAPID LEVEL Rapid Level connection rod cutting table. (NB : Carry out the cutting measurement with the rod in traction with respect to the body)

RAPID LEVEL” TYPE LEVEL SWITCH WITH 1 FLOAT 1- These electromagnetic level gauges in Kits can be obtained in the required length “L” simply by cutting the control rod with an ordinary pipe cutter and press fitting the float in the cutting place (see table for cutting). 2- The control rod can commutate the signal of 1 or 2 Reeds in sequence (with single or exchange contact). 3- The float does not hold magnets, therefore the Level can also be used in the presence of dirty liquids or ferrous particles. Maximum working pressure: 10Bar.

* INSTALLATION POSSIBLE ONLY FROM INSIDE BY REMOVING THE FLOAT AS IT DOES NOT PASS FROM THE PROCESS ATTACK

RAPID LEVEL” TYPE LEVEL SWITCH WITH 2 FLOATS S/STEEL MAX. LEVEL CONTROL ROD * The RL/G2 range has a head which holds two control rods and two floats. * Each control rod can commutate the signal of 1 or 2 Reeds (with single or exchange contact). Each head can therefore contain from 2 to 4 Reeds. * The most suitable system can chosen for each rod. * In case of excessively dense liquids the two floats can be supplied entirely separate from each other to prevent rod 1 from undergoing friction with the float of rod 2. * The minimum distance between the two points to be controlled is 100mm. Maximum...

* INSTALLATION POSSIBLE ONLY FROM INSIDE BY REMOVING THE FLOAT AS IT DOES NOT PASS FROM THE PROCESS ATTACK

RL/G1 - L “RAPID LEVEL” TYPE LEVEL SWITCH FOR SIDE USE * This level switch for “side” use is very versatile: like the “RL” range, it can also be used to control the maximum or minimum level and for controlling the minimum plus empty or maximum or overflow. * Unlike the “RL” range, the distance between the 1st and 2nd signal is not fixed, but has an angular value, which gradually increases with the length of the rod. * This gives the designer many choices; in fact, by varying the length “L”, the switching points of the 1st and 2st Reed vary (read on axis 1 and 2). * The Level (see diagram S3)...

* INSTALLATION POSSIBLE ONLY FROM INSIDE BY REMOVING THE FLOAT AS IT DOES NOT PASS FROM THE PROCESS ATTACK

RL / AT - (G1 / G2) LEVEL INDICATOR IN AISI 316 WITH 1 OR 2 POINTS OF CONTROL AND TEMPERATURE UP TO 200 °C ELECTRICAL CONNECTION 6 POLI IP68 S/STEEL FITTING FIXING S/STEEL BODY OPERATION: When the float rises or falls, the magnet in the upper part of the rod goes to activate or deactivate in the body 1 or 2 reed contacts, thus having the possibility of sending an electrical signal that can drive any device connected to it. FEATURES: The Rapid Level series “AT” can be used in all situations where it is necessary to have parts in contact with the liquid completely in AISI 316. You can control up...

TECHNICAL DATA AND ORDER PLAN VIEW OF TERMINAL INSIDE THE HEAD - In situations where the liquid has a lot of movement inside the tank, it is recommended to use a stilling INOX that goes to protect the sliding of the rod control. ELECTRICAL CHARACTERISTICS - For all levels an electrical connection is provided through a head aluminum IP68, on request you can have the variant in AISI 316 IP68 which also includes the bleed nipple, 316. This solution is particularly suitable for harsh conditions or in the marine environment.

RL/G1 - MAXI “MAXI” LEVEL SWITCH FOR CONTROL UNITS POSSIBILITY OF REINFORCEMENT WITH LIQUIDS IN MOVEMENT SOLID ROD AND FLOAT IN PVC FOAM QUICK AND EASY ADJUSTMENT OF SWITCHING POINT Maximum working pressure: 10Bar.

MG - Mini Genius ENTIRELY IN PLASTIC MATERIAL FOR SMALL CONTROL UNITS * EASY TO USE there are two scales (oil and water) on the rod, that indicate the exact cutting place for obtaining the required switching point. * SAFE a) the level switch has structural separation of the electrical part from the tank; b) insensitive to dirty liquids and metal particles. * VERSATILE a) it can have two types of fixing (flange + thread) at the same time; b) the electrical contacts are reversible (N.O. / N.C. in pres.). * COMPATIBLE all parts of the level switch are made from the same material (nylon-glass /polypropylene-glass),...

FIXING RING Cutting the control rod. After choosing the scale corresponding to the liquid used (water - oil), cut the control rod with nippers or scissors at the place corresponding to the control level (see level “L”); then join the float to the rod, fitting it in the spec

Unlike the other level switches, all the components (body - rod - float - etc.) of the MG series are made from the same material; this makes it very easy to consult the compatibility tables and choose the right material needed. Moreover, by ordering the flanged (3 or 6 holes) level switch the user will also have a 1” Gas thread connection (3/4” Gas on request) available, for further fixing possibilities. A main feature of the MG range is reversibility: by shifting the position of the magnet (M) it is possible to have the contact CLOSED IN PRESENCE or CLOSED IN ABSENCE of liquid. REED MAGNET STOP...

MG - Mini Genius SUMMARY CHART

RL/G1 - V VISUAL IMMERSION LEVEL SWITCH FLANGED CONNECTION VISUAL MONITORING OF LIQUID LEVEL FIXING FLANGE 3 HOLES ROD PROTECTION AND CENTRING TUBE QUICK AND EASY ADJUSTMENT OF MINIMUM MONITORING POINT, LIKE FOR THE ENTIRE “RL” RANGE * INSTALLATION POSSIBLE ONLY FROM INSIDE BY REMOVING THE FLOAT AS IT DOES NOT PASS FROM THE PROCESS ATTACK