PLUGS
17Pages

PLUGS Plugs different types of plugs for all applications in your tank.

ONE INSTRUMENT FORTWO FUNCTIONS The temperature probe occupies the space provided for every common drain plug for tanks, control units, oil sumps, etc. With N.O. contacts, it is used to send an electrical signal when the temperature of the liquid exceeds a limit deemed acceptable. The N.C. thermostats are normally used as thermoprotectors: they disconnect the voltage, stopping the system, when the temperature is too high. The standard range provides for thermostats at 50° - 60° - 70° - 80°C. With N.O. contacts normally open or N.C. contacts normally closed. Besides the possibility of a...

TECHNICAL DATA AND ORDER DIGITAL DISPLAYS ELECTRICAL CONNECTIONS MICRO CONNECTOR IP65 SHAPE “C“

METAL PLUGS METAL PLUGS WITH BREATHER - Made with milled hexagonal head and crown in light aluminium alloy. - Made with milled hexagonal head and crown in light aliminium alloy. - Seal ensured by a gasket with oilproof plain washer. - Seal ensured by a gasket with oilproof plain washer. - For adequate quantities they can be supplied with special threads and with materials on request, or to customer design. - In the TMS range, the breather consists of a 2mm hole, which maintains the atmospheric pressure inside the tank. - They are normally supplied with label bearing the word OIL. - For...

METAL PLUGS WITH PERMANENT MAGNET Consisting of a milled hexagonal head and crown in light aluminium alloy, the metal plug with magnet (which can also be used as a normal tank drain plug) can catch the metal particles present in the oil. - Seal ensured by a gasket with oilproof plain washer. - Permanent magnet in cobalt alloy. - For adequate quantities they can be supplied with materials and special executions to customer design. F.lli Giacomello

METAL PLUGS WITH ENCASED MAGNET - Body material: steel galvanized white - Sealing: NBR synthetic rubber. - Magnet: neodyminium 35 galvanized - Maximum operating temperature continuos: 80° C For adequate quantities, there is a neodymium magnet suitable for temperatures up to 1600 C. -The magnet encased eliminates any risk of interference in the internal rotary movements. - Magnetic field up to ten times higher than that of conventional ferrite magnets. - Galvanizing LANTHANE for greater resistance to salt spray test. F.lli Giacomello

LIQUID LEVEL VISUAL INDICATOR PLUGS - Body in aluminium alloy D1 IS. - Oilproof gasket. In aluminium or fibre on request. - Suppliable in anodised aluminium or brass OT 58 on request, for adequate quantities. - Sight window in thermoplastic material with optimum shock proofness, dimensional stability and not subject to ageing. The transparency of the sight window does not change at high temperatures. The particular profile of the trim, in white prepainted aluminium, makes reading the liquid level easy, and also allows rapid downflow if the quantity of liquid decreases. Tmax: 80°C Pressure 5...

TEI HEX. SOCKET HEAD PLUGS TMEI HEX. SOCKET HEAD MAGNETIC PLUGS The hexagon socket head plug is useful when good tightening torque is required while avoiding protrusions. - Body in aluminium alloy D1 IS. - Oilproof gasket. Magnetic plugs equipped with permanent magnets, in alloy Al-Ni-Co 5, with wide range of action, able to catch metal particles in the oil. -MAGNET Al-Ni-Co 5 - Body in aluminium alloy D11S (in steel and brass on request). - Oilproof gasket. F.lli Giacomello

TSP BREATHER CAPS WITH VALVE SILENCER CAPS WITH PAD The breather plug with valve proposed here works on the following principle: venting is obtained by the pressure inside the reducer acting on the closing gasket, which raises the spring preset to a pressure of 0.25 - 0.30 bar allowing the vapours to escape and then closes. It is also recommended for machines exposed to pressurised water sprays, since the release part is protected by a cap that stops foreign bodies and liquids from entering. Body in brass OT 58. Oilproof gaskets. F.lli Giacomello The silencer cap with sintered pad condenses...

TCSL/P OIL FILLER AND BREATHER CAPS WITH LABYRINTH AND SINTERED WASHER This new-concept breather cap is recommended for: - reduction units - machine tools - compressors, etc. For"medium"oil splash. It consists of an ample vapour vent chamber. - Body in brass OT 58 - Oilproof gasket. This range of oil breather caps has the same constructional characteristics as the TCSL, with the addition of a sintered bronze washer in the bottom part of the vent chamber, making it suitable for a "heavier duty" and therefore suitable for: reduction units, overdrives, building machinery, road machinery, etc....

TSM/1/2/3... MAGNETIC PROBE CAP WITH ONE OR MORE ELEMENTS The probe cap with several elements and magnetic arc closing is the equivalent in characteristics to a magnetic column, but more economical. - Made with milled hexagonal head and crown in light aluminium alloy. - Chromed zinc steel rod. - Seal ensured by a gasket with oilproof plain washer. - Spacers for spring magnetic arc closing. - Permanent magnets in ferritic alloy. - Suppliable with one or more magnetic elements compatible with the length of the rod. - Max number of elements: 8 Example: TSM/2 - 600 - Standard length 600 mm...

TMA -TMAS METAL CAPS WITH LEVEL ROD AND POSSIBILITY OF BREATHER - Made with milled hexagonal head and crown in light aluminium alloy. - Seal ensured by a gasket with oilproof plain washer. - In the TMAS range the breather consists of just a 2mm hole. - Chromed zinc steel level rod. - Normally supplied with the word OIL. - Suppliable on request with circular channels for identifying the minimum or maximum level. - Suppliable with materials and threads to design, for adequate quantities. F.lli Giacomello

TPSPLASTIC PLUGS WITH BREATHER - Identical for functionality to the serious TM, carried out entirely in tecnopolimero with glass. Resistant to solvents, oils and other chemical agents. - Identical for functionality to the serious IMS, carried out entirely in tecnopolimero with glass. Resistant to solvents, oils and other chemical agents. - Estate guaranteed by a level washer in rubberizing synthetic NBR -They come normally furnished without any label - Highest temperature of exercise in continue: 100 °C - Estate guaranteed by a level washer in rubberizing synthetic NBR - In the TPS range,...