LV MULTICONTROL RANGE VISUAL LEVEL GAUGES 28 M10 OR M12 SCREWS RECESSED IN THE BODY 13 “U“ PROTECTION SCREEN WITH GRADUATED SCALE SCALE STAMPED ON ALUMINIUM FOR PERFECT CONTRAST WITH LIQUID The visual level gauges allow the liquid level to be checked in a clear and precise way at any time. The principle used is that of communicating vessels: the liquid goes through the level gauge by means of hollow screws, showing the user the exact point inside the tank. Through a full range of components our level gauges can meet the most particular needs, at a limited cost. The level gauges can be equipped with taps that stop the flow of liquid from the tank to the gauge and with PT100 for continuous monitoring of temperature through PLC. The C/C distances of 127 ÷ 4000 mm supplied meet the needs of all customers. In this way they can be interchangeable with the level gauges available on the market and, above all, “custom made” according to needs. The “U” protection screen is normally fitted in order to obtain visibility on the front part of the level gauge, but if necessary it can be turned 90° to obtain visibility on the right or left. F.lli Giacom

VISIBLE TUBE IN LATERAL POSITION WITH LOW PROFILE L = 15mm MAX SERIGRAPHY ON REQUEST ON CUSTOMUR DRAWING Maximum pressure: see page 33 Maximum tightening torque: 10 Nm