IEG-U1F

IEG-U1F

IEG-U1F

Product catalog summary
Universal Electromagnetic Level Indicators Overview
The document provides technical specifications and installation instructions for the IEG-U1F, IEG-U2F, and IEG-UMMF universal electromagnetic level indicators. These devices are designed to monitor liquid levels in tanks, ensuring safety by indicating minimum or maximum levels.

Specifications
  • Suitable for use in tanks under pressure up to 10 bar.
  • Compatible with mineral oils (viscosity up to 80°E), gas oil, and other non-corrosive, non-flammable liquids.

Operation
The indicator uses a float with a magnet that activates a Reed switch at a pre-set level, allowing for the transmission of signals or activation of connected electrical equipment.

Installation Instructions
  • The indicator is provided as a kit with a tube length of 500 mm (IEG-U1F/U2F) or 500/450 mm (IEG-UMMF), adjustable with a pipe cutter.
  • Ensure vertical installation with the float at least 35 mm away from ferrous surfaces.
  • To change the contact from normally closed (N.C.) to normally open (N.O.), invert the float.

Connection Details
  • Connector: CE DIN 43650 IP65 PG.9
  • Includes a fixing flange and threaded union for secure assembly.
See more

Catalog excerpts

IEG-U1F-1

Via Magenta 77 cap15/A - 20017 - Rho (MI) - ITALY Tel. +39/02 9301278 - Fax. +39/02 9301690 [email protected] - www.fratelligiacomello.it UNIVERSAL ELECTROMAGNETIC LEVEL INDICATORS WITH ONE OR TWO POINTS ELECTROMAGNETIC LEVELS Precision and functionality, control points single or multiple, different materials to meet the various requirements of application.

 Open the catalog to page 1
IEG-U1F-2

UNIVERSAL ELECTROMAGNETIC LEVEL INDICATORS Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks (even under pressure at 10 bar) and hydraulic power packs containing mineral oils with viscosity not higher than 80°E; also suitable for gas oil and all other non-corrosive and inflammable liquids. When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical...

 Open the catalog to page 2

Archived catalogs

  1. Rapid level

    18  Pages

  2. IEG ATEX

    5  Pages

  3. LVC

    4  Pages

  4. RAPID LEVEL

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.