*mydirectindustry

IEG-FCH1

Product catalog summary

Product Overview: The IEG-FCH1 is a side electromagnetic level indicator designed to monitor liquid levels in tanks. It features a single contact and an M12 x 1.5 connection, ensuring maximum safety for detecting minimum or maximum liquid levels.

Specifications: The device includes a Reed switch that can be configured as normally open (N.O.) or normally closed (N.C.). It operates by using a magnet housed in a float to open or close the contact at a pre-established point, allowing for the activation of signals or electrical equipment.

Installation: The indicator is designed for side mounting at the desired control point. To switch the contact from N.C. to N.O., the indicator can be rotated 180 degrees.

Electrical Characteristics: The model IEG-FCH11 PDA 03 PP features a SPST contact with a power rating of 50 W, a current strength of 0.5 A, and a commutable voltage of 200 VDC - 240 VAC. It is protected to IP 65 standards and operates within a temperature range of -20°C to +80°C.

Important Notes: The maximum wall thickness for installation is 5 mm, and the device includes a 30 cm lead wire. The maximum pressure is specified, ensuring compatibility with the material of the level indicator.

Catalog excerpts

SIDE ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND M12 X 1.5 CONNECTION SMALL LEVELS Levels to be in place to monitor point. Via Magenta 77 cap15/A - 20017 - Rho (MI) - ITALY Tel. +39/02 9301278 - Fax. +39/02 9301690 [email protected] - www.fratelligiacomello.it

Open the catalog to page 1

IEG-FCH1 SIDE ELECTROMAGNETIC LEVEL INDICATORS WITH ONE CONTACT AND M12 x 1.5 CONNECTION USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks compatible with the material of the level indicator. OPERATION: When the float of the indicator approaches the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating or disconnecting any electrical equipment connected to it. FITTING: The indicator must be fitted in the side...

Open the catalog to page 2

All Fratelli Giacomello catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list