1. Catalogs
  2. Fratelli Giacomello
  3. ELECTROMAGNETIC LEVELS

ELECTROMAGNETIC LEVELS

ELECTROMAGNETIC LEVELS
1 / 32 PagesView full catalog

ELECTROMAGNETIC LEVELS

Product catalog summary

Technical Summary of Clamp Electric Connection Specifications

Clamp Sizes and Required Electric Connections

This document specifies the electric connection requirements for two clamp sizes used in an electrical setup.

  • Clamp 2” / P/2: Requires electric connections labeled as 1, 2, and 5.
  • Clamp 2” 1/2: Requires electric connections labeled as 1, 2, and 3.

Key Points

  • The clamps differ in their electric connection requirements despite similar sizing.
  • Proper identification of connection points (1, 2, 3, 5) is critical for correct installation.

Recommendations

  • Ensure that the correct electric connections are made according to the clamp size to avoid malfunction.
  • Verify connection labels before installation.
See more

Catalog excerpts

ELECTROMAGNETIC LEVELS-1

ELECTROMAGNETIC LEVELS Precision and functionality, control points single or multiple, different materials to meet the various requirements of application.

 Open the catalog to page 1
ELECTROMAGNETIC LEVELS-2

ELECTROMAGNETIC LEVEL INDICATORS WITH ONE OR TWO CONTACTS AND 1/2"GAS CONNECTION IEG-TCMM 1/2 USE: Made to ensure, with maximum safety, the minimum or minimumand maximum levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic...

 Open the catalog to page 2
ELECTROMAGNETIC LEVELS-3

ELECTROMAGNETIC LEVEL INDICATORS WITH ONE OR TWO CONTACTS AND 3/4" GAS THREAD IEG-TCMM 3/4 USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks and hydraulic power packs containing mineral oils with viscosity not higher than 80°E; also suitable for gas oil and other non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or activating...

 Open the catalog to page 3
ELECTROMAGNETIC LEVELS-4

ELECTROMAGNETIC LEVEL INDICATORS WITH SPST OR SPDT CONTACTS Ml 8x1,5 CONNECTION USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the preestablished distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting...

 Open the catalog to page 4
ELECTROMAGNETIC LEVELS-5

IEG-TQ10MM 18x1,5 ELECTROMAGNETIC LEVEL INDICATORS ELECTROMAGNETIC LEVEL INDICATORS WITH TWO CONNECTION WITH M18x1,5 AND DOUBLE CONTACT SPST CONTACTS OR MINIMUM-EMPTY CONTACTS USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all noncorrosive and inflammable liquids. OPERATION: IEG-TQ1OMM: when the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in...

 Open the catalog to page 5
ELECTROMAGNETIC LEVELS-6

IEG-TQ071 18x1,5 IEG-TQ072 18x1,5 ELECTROMAGNETIC LEVEL INDICATORS WITH SPST OR SPDT CONTACTS Ml 8x1,5 CONNECTION CONNECTION: Connector CE EN 175301-803-A IP65 PG.9/11 USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes,...

 Open the catalog to page 6
ELECTROMAGNETIC LEVELS-7

IEG-TQ07MM 18x1,5 ELECTROMAGNETIC LEVEL INDICATORS WITH TWO CONTACTS AND Ml 8x1,5 CONNECTION USE: Made to ensure, with maximum safety, the minimum levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting...

 Open the catalog to page 7
ELECTROMAGNETIC LEVELS-8

ELECTROMAGNETIC LEVEL INDICATORS WITH SPST OR SPDT CONTACTS AND 3/8" GAS CONNECTION USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: When the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting...

 Open the catalog to page 8
ELECTROMAGNETIC LEVELS-9

IEG-BTMM 3/8 ELECTROMAGNETIC LEVEL INDICATORS WITH TWO CONTACTS AND 3/8"GAS CONNECTION IEG-BTMV 3/8 ELECTROMAGNETIC LEVEL INDICATORS WITH MINIMUM-EMPTY CONTACTS AND 3/8" GAS CONNECTION USE: Made to ensure, with maximum safety, the minimum or and empty levels of liquids in tanks, and hydraulic power packs containing mineral oils with viscosity not higher than 80°E. and for all non-corrosive and inflammable liquids. OPERATION: IEG-BTMM: when the float of the indicator encounters the Reed switch incorporated in the tube at the pre-established distances, the contact activated by the magnet housed...

 Open the catalog to page 9
ELECTROMAGNETIC LEVELS-10

ELECTROMAGNETIC LEVEL INDICATORS WITH ONE OR TWO CONTACTS AND 1" GAS CONNECTION IEG-TCMM CONNECTOR NYLON FLOAT USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks. Suitable for tanks containing liquids compatible with the brass tube, such as hydraulic and lubricant oils (with density not higher than 80°E), petroleum, etc. OPERATION: When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic...

 Open the catalog to page 10
ELECTROMAGNETIC LEVELS-11

ELECTROMAGNETIC LEVEL INDICATORS WITH ONE OR TWO CONTACTS AND FLANGED CONNECTION FIXING FLANGE SEAL USE: Made to ensure, with maximum safety, the minimum or maximum level (IEG - N1F / N2F) or minimum and maximum (IEG - MMF). Suitable for tanks containing liquids compatible with the brass tube, such as hydraulic and lubricant oils (with density not higher than 80°E), petroleum, etc. OPERATION: When the float of the indicator encounters the Reed switch at the pre-established point, the contact activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending...

 Open the catalog to page 11

Archived catalogs

  1. Rapid level

    18  Pages

  2. IEG ATEX

    5  Pages

  3. LVC

    4  Pages

  4. RAPID LEVEL

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.