ANTI-STATIC BARS The ultimate static eliminator for machinery manufacturers: compact, with built-in electronics, 24VDC supply and very powerful performance. Static neutralisation to meet the requirements of high performance machinery. Integrated high voltage power supply, requires only a low voltage 24V DC input. > Shockless, resistively coupled emitters made in tungsten for unlimited life. > LED status indication: Bar OK: (green), fault (red). > Remote monitoring of operational status. > 100% coverage. Effective length = Overall length. No dead zone. > Standard M8 4 pin connector. > Available in two versions: 3024 F - high speed version for speeds up to 1000m/min, for distances from 25mm to 100mm. 2. 3024 L - long range version for distances from 100mm to 500mm Electrical Supply: 24V DC (21-28V), maximum current required 0.5A. M8 connector. The M8 x 4 core cable must be ordered separately - see cable options on page two. Remote Monitor: Sends 24V signal to the PLC or other destination. This voltage is taken from the power to the Bar - no additional power source is required. High Voltage Supply: Up to 11kV supply integrated into Bar. FR-ABS Industrial grade extrusion, epoxy resin. Protection Classification: 90-250V AC, Power Supply. Code: E3024-PSU Scotts Business Park, Bampton, Devon, GB, EX16 9DN T + 44 (0) 1398 331114 F + 44 (0) 1398 331411 E [email protected] W www.fraser-antistatic.co.uk

> Designed to cope with speeds in excess of 1000m/min. 3024 F (fast) > Designed to cope with distances from 100mm to 500mm. 3024 L (long range) > Designed to cope with speeds > Ideal for fast-moving materials. in excess of 1000m/min. > Designed to cope with distances from 100mm to 500mm. > Ideal for applications with changing geometry. > Ideal for fast-moving available > Minimum length 250mm, materials. in 50mm steps to 4.5m. > Ideal for applications with changing geometry. > Minimum length 300mm, available in 100mm steps to > Minimum length 250mm, available in 50mm steps to 4.5m. > Operating...