The 3014 introduces new standards in performance and size in a 24 V DC Static Eliminator. It offers market leading performance in a very compact Bar. Static neutralisation to meet the requirements of high performance machinery. Integrated high voltage power supply, requiring only a low voltage 24 V DC input. > 7.5 kV of ionisation power. > Compact size for compatibility with modern machinery. > Emitters made from tungsten for best long term performance; Resistively coupled for shockless operation. > LED status indication: Bar OK: (green), fault: (red). Clean Me: (alternating red/green) > Remote monitoring of operational status and cleanliness through 24 V signals. > Effective length = 20 mm less than overall length. > Standard M8 4 pin connector. > Best operational distance: 20 mm to over 150 mm. > Protected against undervoltage, overload and reverse polarity wiring. > Cleanroom compatible to ISO4. > Options: - Airboost Electrical Supply: Input: 24 V DC (21-27 V), max current 0.5 A. M8 x 4 Pin connector. M8 x 4 core cable to be ordered separately. 90 -250 V PSU also available. Size and construction: Profile 32.5 x 20 mm. Minimum length 250 mm then in 40 mm steps to 4010 mm. FR-ABS Industrial grade extrusion, epoxy resin, tungsten. IP66. Fully sealed. Weight: 0.25 m = 0.28 kg then 0.51 kg per additional metre. System Monitoring: LED on endcap: green = all OK green/red flashing = needs cleaning red = fault Remote monitoring makes this information available with a 24 V signal from the Bar to a PLC or other destination. This voltage is taken from the Bar - no additional power source is required. Compatible with IEC 61131-2 'Type 3' PLC inputs. Signal protected against shorting and mis-wiring. High Voltage Output: Up to 7.5 kV supply integrated into Bar. - Airknife Mounted Environment: -10 to 55°C, Maximum Humidity 70% non-condensing. Scotts Business Park, Bampton, Devon, GB, EX16 9DN T + 44 (0) 1398 331114 F + 44 (0) 1398 331411 E [email protected] W www.fraser-antistatic.com © Fraser Anti-Static Techniques Ltd 2016

For modern machinery and production processes within the operation distance of 20 - 150 mm. Ideal as a more powerful alternative to conventional AC static eliminators. No need for additional power supply. The 3014 comes with electronics and 7.5 kV fully integrated. - Minimum length 250 mm, then in 40 mm steps up to 4010 mm. - Operating distance from 20 mm tol50 mm. Dimensions Order Length T M6 x 40 stud and flange nut. Two mounting blocks for Bars up to 1m, plus 1 extra for every additional 500 mm. Other stud lengths are available on request, please contact the manufacturer for options. Scotts...