Water cooled condensing units - Compressor/receiver groups 50 Hz

Product catalog summary

Overview: This document outlines the technical specifications for FRASCOLD's SH series water-cooled condensing units. It covers standard equipment, optional accessories, refrigerating capacities, and technical data.

Standard Equipment: The units include a semi-hermetic compressor, a water-cooled condenser with a safety valve connection, service valves, and a base frame. Some models also feature a vibration absorber on the discharge line.

Optional Accessories: Available upon request are a crankcase oil heater, a capacity control device, and an unloaded start device.

Refrigerating Capacities: Performance is calculated under specific conditions, such as a liquid subcooling of 5K, a specified condensing temperature, and a suction gas temperature of 20°C, following the EN12900 standard for R407C refrigerant.

Compressors: The SH series uses semi-hermetic compressors cooled by suction refrigerant, equipped with valves, pressure connections, an oil sight glass, a suction filter, oil charge, rubber vibration absorbers, and water-cooled heads.

Water-Cooled Condensers: Designed for high efficiency, these condensers have a carbon steel shell and tube sheet, and copper tubes with integrally finned thick walls. They support both mains water and cooling tower water supply.

Technical Data: The document includes tables detailing maximum refrigerant charge, compressor models, and refrigerating capacities at various evaporating temperatures.

Key Specifications: Detailed tables provide information on refrigerating capacities, technical data, water supply connections, and specific model performance metrics.

Catalog excerpts

WATER cooled condensing units >

Open the catalog to page 1

FRASCOLD SpA si riserva il diritto di modificare i dati e le caratteristiche contenute nel presente catalogo, senza obbligo di preavviso.Օ FRASCOLD SpA reserves the right to change at any time, specifications or design without notice and without incurring obligations. FRASCOLD SpA se rթserve le droit de modifier sans pravis les donnes et les caract驩ristiques contenues dans cette notice. FRASCOLD SpA behդlt sich das Recht vor Spezifikationen oder Ausfhrungen jederzeit ohne Bekanntgabe zu ndern. Ref: > FTEC09-04 Edizione: Febbraio 2007 sostituisce: FCAT09-03 Dicembre 2003 Realizzazione: FRASCOLD...

Open the catalog to page 2

Water cooled condensing units - Compressor/receiver groups 50 Hz-3

Dotation standard Les groupes de condensation se composent de compresseur semi-hermtique, condenseur eau avec connexion pour soupape de s頻ret, robinets d'isolement, chassis et liminateur de vibrations au refoulement. > Accessoires Les groupes de condensation SH Standard equipment Lieferumfang Condensing units are essentially composed of semi-hermetic compressor, water cooled condenser with safety valve connection, service valves, base frame and depending by the model vibration absorber installed on discharge line. Die Verflssigungss伤tze beinhalten halbhermetische Verdichter, wassergekhlte Verflssiger,...

Open the catalog to page 3

Water cooled condensing units - Compressor/receiver groups 50 Hz-5

Le capacitठ frigorifere, riportate nelle tabelle da pagina 6 a pagina 9, sono state calcolate alle seguenti condizioni:- sottoraffreddamento del liquido 5 K- temperatura di condensazione come indicato- Refrigerating capacities shown in page 6 up to page 9 are based on the following conditions:- liquid subcooling 5 K - condensing temperature as shown- Les puissances frigorifiques, reportes sur les tableaux de la page 6 la page 9, ont 頩t calcules selon les conditions suivantes:- sous-refroidissement du liquide 5 K - temp驩rature de condensation indique- Die auf den Seiten 6 bis 9 gezeigten Klteleistungen...

Open the catalog to page 5

Water cooled condensing units - Compressor/receiver groups 50 Hz-10

CW CW HPHP CWCW SVDV > C VS LV = DEA = 13 mm B > posizione del rubinetto di aspirazione per il modello SH 4 24 F Y suction valve location for model SH 4 24 F Y position de la vanne d'aspiration pour le modle SH 4 24 F Y Stellung des Saugventiles fr das Modell SH 4 24 F Y >

Open the catalog to page 10

Water cooled condensing units - Compressor/receiver groups 50 Hz-11

CWDVSV VSHP LV > C E BDA== 13 mm Disegno Drawing Plan Zeichnung >

Open the catalog to page 11

Water cooled condensing units - Compressor/receiver groups 50 Hz-13

Unit condensatriceCondensing unit Groupe de condensationVerfl頼ssigungssatzRubinetto aspirazioneSuction valveVanne d'aspirationSaugventil ؘ " mm Peso netto Peso lordo Net weight Gross weight Poids net Poids brut Netto Gewicht Brutto Gewicht kg kgRubinetto del liquidoLiquid valveVanne du liquideFlssigkeitsventil 옘 " mm Lunghezza Larghezza Altezza Length Width Height Longueur Largeur Hauteur Lnge Breite Hhe A B C mm mm mmInterassi di fissaggioBase mountingTrous fixationBefestigungsl䶶cher D E mm mm Disegno Drawing Plan Zeichnung SH 7 39 S - Y 1 3/8 35.0 3/4 19.0 910 405 684 420 240 163 178 4 SH 10...

Open the catalog to page 13

Water cooled condensing units - Compressor/receiver groups 50 Hz-17

DV rubinetto di compressione discharge valve vanne de refoulement Druckventil LI attacco ingresso liquido inlet liquid connection entr驩e du liquide Kltemittel-Eintritt LO rubinetto uscita liquido outlet liquid valve sortie du liquide Kltemittel-Austritt SG spia livello liquido liquid sight glass voyant de niveau Schauglas SV rubinetto di aspirazione suction valve vanne d'aspiration Saugventil > FTEC09-04 VS tappo per valvola di sicurezza safety valve plug bouchon pour vanne de s䤻ret Stopfen Sicherheitsventil >

Open the catalog to page 17