Semi-hermetic reciprocating compressors
24Pages

Reciprocating semi-hermetic compressors refrigeration, process cooling, air conditioning, heating pumps

FRASCOLD reciprocating semi-hermetic compressors Since 1936 Quality Product Quality Service Since 1936 a path of development, constant improvement and a focus on cutting edge technologies Throughout this time, Frascold has been producing ‘Made in Italy’ compressors for the cooling and air conditioning industry, marketing them worldwide for a wide range of applications. It has built its reputation and established its international market position thanks to its ability to constantly improve its product, whilst cultivating customer relationships in order to stay firmly at the forefront of its...

FRASCOLD reciprocating semi-hermetic compressors General information Frascold produces a wide range of semi-hermetic reciprocating single- and two-stage compressors with displacement range from 4 to 240 m3/h at 50Hz and electrical ratings from 0.50 to 80 HP. Suitable for conventional HFC-based , new low-GWP, HFO and natural refrigerants. The compressors are suitable for use in a wide range of retail and industrial cooling applications, process chillers, air conditioning and heat pumps; in single, multi-compressor systems and cascade systems. A wide range of accessories broadens their...

FRASCOLD reciprocating semi-hermetic compressors Protection of compressors series A - B – D All models are supplied with protection consisting of a chain of PTC thermistors inserted in the electric motor stator and connected to the INT69 electronic control module inside the electrical box. The INT69 devices is triggered and stops the compressor in the event of thermal overload due to electric motor or mechanical issues. Protection of compressors series Q - S - V - Z - W with the new Diagnose technology Frascold integrates the Diagnose technology on semi-hermetic reciprocating compressors,...

FRASCOLD reciprocating semi-hermetic compressors Capacity control with RSH system The cooling load of many applications may be extremely variable at different times and cooling systems must adapt to this variability. However, there is a limit in the number of admissible hour cycles for the compressor and a minimum operation time to be complied with. It is obvious that complying with these limits and adapting to the required cooling load result in an operating compromise that is not always the most efficient one. In general, the compressor’s functional limits described above set the maximum...

FRASCOLD reciprocating semi-hermetic compressors Kriwan Diagnose multifunctional device INT69 ®Diagnose and INT69TML ®Diagnose Kriwan Diagnose devices are a further development of compressors’ protection units. The Diagnose technology is not only limited to protecting the compressor, but also offers diagnosis and system optimisation features; providing detailed information to technicians in order to promptly diagnose any plant problems; it even makes it possible to prevent malfunctioning before it occurs thanks to data analysis. The additional protection features help extending the...

FRASCOLD reciprocating semi-hermetic compressors ATEX compressors Within the European Union, mechanical and electrical equipment used in explosive atmosphere must comply with ATEX requirements. Frascold has been among the first compressor manufacturers to offer a comprehensive range of ATEX-certified compressors. All ATEX compressors produced by Frascold are approved also for use with hydrocarbons R290 and R1270. Contact Frascold for use with other conventional hydrocarbons. Construction concepts ATEX compressors are designed in accordance with safety requirements set forth for use in...

FRASCOLD reciprocating semi-hermetic compressors Discharge line Suction line Locked rotor current 400V / 50 Hz (A) Pipe connections (valves with solder conn.) COMPRESSOR MODEL Technical data 1) Average sound pressure level in application NT (-10°C / 45°C) 2) Average sound pressure level in application LT (-35°C / 40°C)

FRASCOLD reciprocating semi-hermetic compressors Technical data Discharge line Suction line Motor version Locked rotor current 400V / 50 Hz (A) COMPRESSOR MODEL Pipe connections (valves with solder conn.) 1) Average sound pressure level in application MT (-10°C / 45°C) 2) Average sound pressure level in application LT (-35°C / 40°C)

FRASCOLD reciprocating semi-hermetic compressors Operating limits Compressor operation in possible within the limits shown on the applicazion diagrams. Please note the different zones. Restrictions on the limits of operation can occur when the compressor is controlled by inverter. For the operating limits of each compressor consult Frascold Selection Software. Additional cooling or reduced suction gas temperature (<20K) Additional cooling or suction gas temperature max 0°C Suction side maximun pressure 20,5 bar Discharge side maximun pressure 30 bar

FRASCOLD reciprocating semi-hermetic compressors Operating limits Compressor operation in possible within the limits shown on the applicazion diagrams. Please note the different zones. Restrictions on the limits of operation can occur when the compressor is controlled by inverter. For the operating limits of each compressor consult Frascold Selection Software. Additional cooling or reduced suction gas temperature (<20K) Additional cooling or suction gas temperature max 0°C Suction side maximun pressure 20,5 bar Discharge side maximun pressure 30 bar

FRASCOLD reciprocating semi-hermetic compressors Semi-hermetic Frascold compressors series A – B – D with INT69 protection device 22 two cylinder model range with a displacement at 50Hz from 3,95 to 19,12 m³/h and a nominal electric power from ½ to 4HP for a wide scope of application in single and multi-compressor systems with HFC and HCFC traditional refrigerants, low GWP new refrigerants, HFO and HC (AXH version). All models can be driven by a VFD and excel for their high efficiency and resulting savings on running cost, for their robust construction, low noise and compact size. These...