Miniature / Miniatur

Miniature / Miniatur
1 / 172 PagesView full catalog

Miniature / Miniatur

Product catalog summary
Assembly Instructions for Bajonett Connectors
1. Assembly of Cable Connectors: Thread components onto the cable, dismantle to 12 mm, strip and solder wires, and fasten with screws.
2. Assembly of Angled Connectors: Thread components, dismantle to 20 mm, strip and solder wires, snap inserts into housing, and secure with screws.
3. Technical Specifications: Connectors feature a push-pull locking system, IP40/IP67 protection, support up to 0.75 mm² wire gauge, rated for 150 V, over 1000 mating cycles, and operate from -25°C to +85°C.
4. Accessories: Protection caps and adapters are available.
5. Ordering Information: Detailed ordering numbers for various configurations.
Overview: Detailed specifications for connectors, including contact numbers, cable outlets, and plating options.
Specifications: Contact numbers range from 2 to 24, cable outlets in sizes 4–6 mm and 6–8 mm, silver and gold plating, rated voltage 32 V to 250 V, current 1 A to 7 A, temperature range -40°C to +85°C, IP40 protection.
Materials: Contacts made from brass and bronze, housing from PBT, brass, nickel-plated, and zinc die-casting.
Connector Types: Male and female angled connectors, panel mount connectors.
Additional Notes: Some configurations are not standardized, increased voltage under specific conditions.
Specifications: Detailed for panel mount connectors, M16 IP40 connectors, contact configurations, plating options.
Performance Parameters: Mechanical life over 500 cycles, temperature range -40°C to +85°C, voltage ratings vary, current 1A to 7A.
Protection and Standards: IP40, pollution degree 2, overvoltage category II.
Additional Features: Locking systems, special configurations.
Notes: References to additional pages for drilling schemes and crimp contact details.
Connector Specifications: Front-fastened panel mount connectors, single wires of 200 mm, AWG 22, contact numbers 4 to 8.
Technical Specifications: Suitable for crimping and soldering, IP40, over 500 mating cycles, temperature range -40°C to +100°C, rated voltage 150V (250V), impulse voltage 1500V.
Assembly Instructions: Detailed for various connector types, torque specifications provided.
Contact Arrangements: Diagrams and descriptions for 2 to 24 contacts, compliant with DIN EN 61076-2-106.
Additional Information: Attenuation curves, specific instructions for angled connectors.
Overview: Technical specifications and ordering information for cable connectors, including male, angled, and female connectors with shielding options.
Specifications: Material brass, nickel plating, contact numbers 2 to 24, cable outlet 4.1 mm to 10 mm, IP67, over 500 mating cycles, temperature -40°C to +100°C, voltage up to 250V, impulse voltage 1500V.
Ordering Information: Specific ordering numbers for each configuration.
Additional Notes: References to additional information on crimp and strip contacts.
Overview: Technical specifications for miniature connectors, female panel mount connectors, termination methods.
Specifications: Housing zinc diecasting, nickel-plated, contact body PBT, silver or gold plating, contact numbers 2 to 24, termination methods soldering, crimping, dip soldering, wire gauge 0.14 mm² to 1.0 mm², IP67, over 500 mating cycles, temperature -40°C to +100°C, voltage 32V to 250V, impulse voltage 1500V, current 1A to 7A.
Standards and Compliance: Some configurations not standardized, increased voltage under specific conditions.
Additional Features: Flexible PCB options, drilling schemes referenced.
Specifications: Detailed for cable connectors, male and female, shielded and unshielded, contact numbers, wire gauge, cable outlet, IP67/IP68, mechanical operation >1000 cycles, temperature -25°C to +90°C, voltage and current specified.
Materials: Contacts, plating, contact body, housing, locking materials specified.
Technical Data of Cable: Wire gauge, material jacket, insulation wire, cable jacket diameter, resistance, temperature range, bending radius, UL approvals.
Assembly Instructions: Detailed for cable connectors with shielding rings.
Ordering Information: Lists ordering numbers for different configurations.
Assembly Instructions for Cable Connectors
Specifications: Cable diameters 4-6 mm, 6-8 mm, 8-10 mm, torque 0.4-1.0 Nm, crimping range 0.14-1.0 mm².
Procedures: For standard and angled connectors, detailed steps provided.
Standards and Ratings: Attenuation curves, IP67 for miniature M16 connectors.
Recommendations: Correct torque, specified dismantling and stripping lengths, appropriate crimping tools.
Component Details: Male and female inserts, coupling rings, seals, sleeves, pressing screws, panel mount connectors.
See more

Catalog excerpts

Miniature / Miniatur-2

Inhaltsverzeichnis Contents Bereich Serie Series Seite Page Schutzart Degree of protection Spannung Voltage Strom Current Snap-in ELC Snap-in IP67 Bajonett NCC Bajonett Push-Pull M16 IP40 M16 IP67 M16-X Snap-in ELC Snap-in IP67 Bayonet NCC Bayonet Push-Pull M16 IP40 M16 IP67 M16-X Miniatur Miniature Übersicht Summary • Snap-in Verriegelungssystem mit Rasthaken • Schutzart Kabelteil im gesteckten und verriegelten Zustand IP54 • Schutzart Flanschteil ungesteckt IP54 • Snap-in locking system with snap hooks • Degree of protection of cable part IP54 when mated and locked correctly • Degree of protection...

 Open the catalog to page 2
Miniature / Miniatur-3

am Kabel angespritzt moulded connectors löten solder schrauben screw crimpen crimp Käfigzugfeder Wire clamp Verriegelung Locking schrauben screw Bajonett Bayonet schnapp snap-in Push-Pull Push-Pull • Steckverbinder mit Push-Pull Verriegelung • Schutzart IP67 • Schirmbare Kabelsteckverbinder mit sehr guten EMV Eigenschaften • Kabeldurchlass 4–8 mm • Druckschraube mit Vibrationsbremse • Connectors with push-pull locking • Degree of protection IP67 • Shielded cable connectors with excellent EMC protection • Cable outlet 4–8 mm • Pressing screw with immunity to vibration • Steckverbinder mit Schraubverriegelung...

 Open the catalog to page 3
Miniature / Miniatur-4

Miniatur Miniature

 Open the catalog to page 4
Miniature / Miniatur-5

Snap-in ELC Miniatur Snap-in ELC Miniature Kabelsteckverbinder • Verriegelungssystem mit Rasthaken • 12-polig • Schutzart IP54 1) • Lötanschluss • Ergonomisches Steckerdesign Cable Connectors • Locking system with snap hooks • 12 contacts • Degree of protection IP54 1) • Solder termination • Ergonomic design of connector Flanschsteckverbinder • Verriegelungssystem mit Rasthaken • 12-polig • Schutzart IP54 1) • Lötanschluss • > 5000 Steckzyklen • Ergonomisches Steckerdesign Panel Mount Connectors • Locking system with snap hooks • 12 contacts • Degree of protection IP54 1) • Solder termination...

 Open the catalog to page 5
Miniature / Miniatur-6

Miniatur Miniature Kabelstecker Male cable connector Flanschdose, löten Female panel mount connector, solder Polzahl Contacts Kabeldurchlass Cable outlet Bestell-Nr. Ordering-No. Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse Material Verriegelung Polzahl Contacts Bestell-Nr. Ordering-No....

 Open the catalog to page 6
Miniature / Miniatur-7

Miniatur Miniature Montageanleitung Assembly instruction 2 1. Abmanteln auf L = 20mm. Ummantelung abstreifen. 2. Druckschraube, Klemmkorb, Dichtring und Kupplungshülse auf Kabel auffädeln. 3. Litzen abisolieren (L = 3mm). 4. Litzen anlöten. 5. Kupplungshülse ausrichten und mit dem Kontaktkörper verrasten. Entriegelung nur mit Lösewerkzeug 07-0002-000 möglich. 6. Den Klemmkorb über den Dichtring bis auf Anschlag schieben und mit der Druckschraube gegen die Kupplungshülse festschrauben. nteln abma tle n disma Kupplungshülse sleeve Druckschraube pressing screw Stiftkörper male contact body 1. Strip...

 Open the catalog to page 7
Miniature / Miniatur-8

Zubehör Miniatur Accessories Miniature Bezeichnung / Description Snap-in ELC Bestell-Nr. / Ordering-No. Maßzeichnung / Drawing (1,45) umlaufend all-round Lösewerkzeug für Kabelstecker Extraction tool for male cable connector Flachdichtung Flat seal

 Open the catalog to page 8
Miniature / Miniatur-9

Miniatur Miniature Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse Material Verriegelung Connector locking system Termination Wire gauge Cable outlet Degree of protection Mechanical operation Upper temperature Lower temperature Rated voltage Rated impulse voltage Pollution degree Overvoltage...

 Open the catalog to page 9
Miniature / Miniatur-11

Snap-in IP67 Miniatur Snap-in IP67 Miniature Kabelsteckverbinder • Snap-in-Verriegelung • 3 – 12-polig • Schutzart IP67 1) • Lötanschluss • Am Kabel angespritzte Ausführungen • Durchmesser 16 mm • Farbige Ausführungen Cable Connectors • Snap-in locking system • 3 – 12 contacts • Degree of protection IP67 1) • Solder termination • Moulded versions • Diameter 16 mm • Coloured versions Flanschsteckverbinder • Snap-in-Verriegelung • 3 – 12-polig • Schutzart IP67 1) • Löt-/Tauchlötanschluss • Durchmesser 16 mm • Farbige Ausführungen Panel Mount Connectors • Snap-in locking system • 3 – 12 contacts...

 Open the catalog to page 11
Miniature / Miniatur-12

Kabelstecker Male cable connector Kabelstecker Male cable connector Miniatur Miniature Polzahl Contacts Kabeldurchlass Cable outlet Bestell-Nr. Ordering-No. Polzahl Contacts Kabeldurchlass Cable outlet Bestell-Nr. Ordering-No. Polzahl Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Material Kontakt Kontaktoberfläche Material Kontaktkörper Material Gehäuse Material...

 Open the catalog to page 12
Miniature / Miniatur-13

Miniatur Miniature Kabelstecker Male cable connector Kabelstecker, rot, blau, grün Male cable connector, red, blue, green Polzahl Contacts Kabeldurchlass Cable outlet Bestell-Nr. Ordering-No. Polzahl Contacts Kabeldurchlass Cable outlet Blau Blue Grün Green Steckverbinder Verriegelung Anschlussart Anschlussquerschnitt Kabeldurchlass Schutzart Mechanische Lebensdauer Obere Grenztemperatur Untere Grenztemperatur Bemessungsspannung Bemessungs-Stoßspannung Verschmutzungsgrad Überspannungskategorie Isolierstoffgruppe Bemessungsstrom (40°C) Material Kontakt Kontaktoberfläche Material Kontaktkörper...

 Open the catalog to page 13

All Franz Binder GmbH + Co. Elektrische Bauelemente KG catalogs and technical brochures

  1. Core Program

    236  Pages

  2. Power

    37  Pages

  3. Subminiature

    37  Pages

  4. about us.

    9  Pages

  5. News

    23  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.