*mydirectindustry

Catalogs
Franz Binder GmbH + Co. Elektrische Bauelemente KG
Core Program

Core Program

Product catalog summary

Overview: The document provides comprehensive technical specifications and descriptions for various series of connectors, including the P67 Subminiature 712/702 series, M9 IP67 Subminiature series, Miniature 720 series, Miniature 678 series, Miniature 770 series, Miniature Series 723, and Power Series 623 and 693. It covers panel mount connectors, cable connectors, and their components.

Specifications: Connectors are available in configurations such as female panel mount, male cable, and angled connectors. They feature IP67 protection, solder termination, and snap-in or bayonet locking systems. The connectors support 2 to 24 contacts with various wire gauges and rated voltages. Materials include PA for housing and Au (Gold) or Ag (Silver) for contact plating. Additional specifications include different termination methods like solder, crimp, and screw clamp, with materials such as brass nickel-plated housing.

Procedures and Standards: Mechanical operation is rated for over 500 mating cycles, with an operational temperature range of -25°C to +85°C. Rated current varies, with some connectors supporting up to 7A at 40°C. Procedures include recommended drill holes for PCBs and assembly instructions for connectors with different cable outlets. Standards compliance includes VDE, SEV, and UL, ensuring safety and reliability.

Recommendations and Best Practices: It is advised to adhere to maximum torque for ring nuts in panel mount connectors, with a limit of 50cNm for manual adjustment. Proper selection of connectors based on required protection (IP40/IP67) and environmental conditions is crucial. Use specified crimping and extraction tools for optimal performance, and consider earth sleeves with seals for certain connectors.

Key Data from Tables and Diagrams: Ordering numbers are provided for each connector type and configuration, aiding in identification and procurement. Diagrams illustrate dimensions and assembly instructions, including panel cutouts and contact arrangements. Tables list contact arrangements, wire colors, and ordering numbers for different configurations.

Technical Information: EMC considerations include shielding properties and the use of conductive housings. Current carrying capacity is determined by IEC 60512-5-2, with derating curves showing the relationship between current, temperature rise, and ambient temperature. Materials used include copper-alloys for contacts, brass for pin contacts, and phosphor bronze for socket contacts, with various surface finishes.

Catalog excerpts

CORE PROGRAM CONNECTORS

Open the catalog to page 1

Subminiature Connectors

Open the catalog to page 4

Automation Technology - Sensors & Actuators

Open the catalog to page 5

■ Subminiature Connectors Range Series Page Degree of protection Voltage Current No. of contacts More versions and information on www.bin

Open the catalog to page 6

Snap-in IP40 ■ Subminiature 719 series • Snap-in locking system • 3 - 5 contacts • Degree of protection IP40 • Solder termination • Moulded versions • Easy assembly Description Drawing Male cable connector without strain relief Contacts Cable outlet 1 Male cable connector with strain relief More versions and information on www.binder-connector.com

Open the catalog to page 8

Snap-in IP40 ■ Subminiature 719 • 709 series Male cable connector, moulded Female cable connector, moulded Female panel mount connector, solder termination/dip-solder termination Component part drawing Cable connector without strain relief Female insert Male insert Sleeve Female insert Male insert Pinch ring Pressing screw Contact arrangements male insert (mating side) 3 contacts 4 contacts 5 contacts Contact arrangements female insert (mating side) Panel cut out 3 contacts 4 contacts 5 contacts Colour of wire, moulded cable connectors 1 brown 2 white 3 blue 4 black 5 grey

Open the catalog to page 9

Snap-in IP67 ■ Subminiature 620 series Snap-in IP67 ■ Subminiature 620 series Snap-in locking system 3 - 8 contacts Degree of protection IP67 Solder termination Diameter 11,5 mm Description Drawing Male cable connector Contacts Cable outlet Black Female cable connector More versions and information on www.binder-connector.com

Open the catalog to page 10

Snap-in IP67 ■ Subminiature 620 series Description Male cable connector, moulded Female cable connector, moulded Male panel mount connector, solder termination Male panel mount connector, solder termination Male panel mount connector, dip-solder termination Female panel mount connector, solder termination

Open the catalog to page 11

Snap-in IP67 ■ Subminiature 620 series Female panel mount connector, solder termination Female panel mount connector, dip-solder termination Adapter for panel mount connectors Adapter for panel mount connectors, front fastened Component part drawing Cable connectors Male insert Female insert Sleeve Seal Pinch ring Pressing screw Panel mount connectors solder Male insert Female insert Flat seal Hexagonal nut Panel mount connectors dip-solder Male insert Female insert Flat seal Hexagonal nut

Open the catalog to page 12

Snap-in IP67 ■ Subminiature 620 series Adapter Flat seal Hexagonal nut Adapter, front fastened Hexagonal nut Flat seal Adapter Contact arrangements male insert (mating side) 3 contacts 4 contacts 5 contacts Contact arrangements female insert (mating side) Panel cut out Panel mount connectors Colour of wire, moulded cable connectors 1 white 2 brown 3 green 4 yellow 5 grey 6 pink 7 blue 8 red Description Protection cap for male cable connector Protection cap for female cable connector Protection cap for male panel mount connector

Open the catalog to page 13

Description Drawing Male cable connector Bayonet locking system 2 - 8 contacts Degree of protection IP40 Solder termination Diameter 12 mm Contacts Cable outlet 3-4 mm Cable outlet 4-5 mm Female cable connector 32 Female panel mount connector More versions and information on www.binder-connector.com

Open the catalog to page 14

Component part drawing Male cable connector Connection ring male connector Sleeve Carrier sleeve part 1 and part 2 Male insert Pressing screw Female cable connector Connection ring female connector Carrier sleeve part 1 and part 2 Female insert Pressing screw Contact arrangements male insert (mating side) 2 contacts 3 contacts 4 contacts 5 contacts 7 contacts 8 contacts Contact arrangements female insert (mating side) Panel cut out 13

Open the catalog to page 15

Micro Push-Pull IP67 ■ Subminiature 420 series Push-Pull locking system 3 - 5 contacts Degree of protection IP67 Solder termination Diameter 9,5 mm Description Drawing Male cable connector Contacts Cable outlet 1 More versions and information on www.binder-connector.com

Open the catalog to page 16

Micro Push-Pull IP67 ■ Subminiature 420 series Micro Push-Pull IP67 ■ Subminiature 420 series Panel mount connectors Female panel mount connector Male panel mount connector Flat seal Hexagonal nut Component part drawing Cable connectors Female insert Male insert Locking device Seal Pressing screw Contact arrangements male insert (mating side) 3 contacts 4 contacts 5 contacts Contact arrangements female insert (mating side) Panel cut out V \J

Open the catalog to page 17

Push-Pull ■ Subminiature 430 series • Push-Pull locking system • 3 - 8 contacts • Degree of protection IP40/IP67 • Solder termination • Diameter 14,5 mm • Shieldable Contacts Cable outlet Female cable connector, shieldable, IP67 Male panel mount connector, IP40, IP67, shielded, IP67 Male panel mount connector, front fastened, IP67, shielded, IP67 11 Overvoltage category I. More versions and information on www.binder-connector.com

Open the catalog to page 18

Push-Pull ■ Subminiature 430 series Female panel mount connector, IP40, IP67, shielded, IP67 Female panel mount connector, front fastened, IP67, shielded, IP67 Protection cap for female cable connector

Open the catalog to page 19

• Screw termination M9 • 2 - 8 contacts • Degree of protection IP40 • Solder termination • Diameter 11,5 mm Contacts Cable outlet 3-4 mm Cable outlet 4-5 mm Female cable connector Male panel mount connector,solder termination Male panel mount connector, dip-solder termination 11 Overvoltage category I. More versions and information on www.binder-connector.com

Open the catalog to page 20

Female panel mount connector, solder termination Female panel mount connector, dip-solder termination 6 3 Female angled panel mount connector, dip-solder termination 5 pol. Ø 0,7 1,89 Male panel mount connector Female panel mount connector Male panel mount connector/Female panel mount connector with flexible PCB max. wall thickness: 1,5 max. Wandstärke: 1,5 mm mm max. wall thickness: 1,5 mm Component part drawing Male cable connector Connection ring male connector Sleeve Carrier sleeve part 1 and part 2 Male insert Pressing screw Attention: max. torque of ring nut in panel mount connector: 50cNm...

Open the catalog to page 21

• Screw termination M9 • 2 - 8 contacts • Degree of protection IP67 • Solder termination • Moulded versions • Diameter 11,5 - 14 mm Description Drawing Contacts Cable outlet 1 3 4 3,5-5 mm 11 Overvoltage category I. More versions and information on www.binder-connector.com

Open the catalog to page 22

Core Program

Core Program

Catalog excerpts

All Franz Binder GmbH + Co. Elektrische Bauelemente KG catalogs and technical brochures