FRANKOSIL® - goes off like a rocket.

Product catalog summary

Introduction
FRANKOSIL Turbo Shot® is an innovative product designed to accelerate the curing process of FRANKOSIL® 1K Plus, making it one of the fastest 1-component waterproofing solutions available. It ensures rapid progress in construction, allowing for load-bearing within a short time after application and providing maximum safety in variable weather conditions.

Specifications and Benefits

Can bear weight after 1.5 hours.
Odourless and suitable for year-round processing.
Easy handling with no mixing errors, as it can be measured with a measuring cup.

Handling and Application

Shake FRANKOSIL Turbo Shot® thoroughly before use.
Mix the entire amount or a portion adjusted to needs into FRANKOSIL® 1K Plus.
Processing time is approximately 15 minutes, rainproof after 30 minutes, reworkable after 1 hour, and can bear weight after 1.5 hours.
One bottle of Turbo Shot® is sufficient for a 6 kg container of FRANKOSIL® 1K Plus.

Environmental Conditions

Measurements are based on 21°C and 50% relative humidity.
Weather conditions such as wind, humidity, and temperature can affect these values.

Contact Information
FRANKEN SYSTEMS GmbH, Südstraße 3, 97258 Gollhofen, Germany. Phone: +49 9339 988 69 – 0, Email: [email protected], Website: www.franken-systems.de

Social Media
Follow FRANKEN SYSTEMS on Facebook and Instagram using #FrankenSystems.

Catalog excerpts

FRANKEN SYSTEMS FRANKOSIL® - goes off like a rocket. With the Turbo Shot®! FRANKO SIL®

Open the catalog to page 1

... so that the bad weather doesn’t slow you down. only one construction site approach... is necessary Faster, better, safer – the FRANKOSIL Turbo Shot® turns multiple work steps possible on a single day FRANKOSIL® 1K Plus into probably the fastest 1-component waterproofing on the market. Rapid progress in construction Able to bear loads within a very short time after application Maximum level of safety in changeable weather does the job whatever the weather 1C FRANKOSIL® 1K Plus with FRANKOSIL Turbo Shot®

Open the catalog to page 2

Can bear weight after 1.5 h Year-round processing FRANKOSIL Turbo Shot® must be shaken thoroughly. Then empty the entire amount of FRANKOSIL Turbo Shot® and stir it evenly into the FRANKOSIL® 1K Plus. Easy to handle, can be measured with measuring cup Alternatively, only part of the Turbo Shot® quantity can be adjusted to the processor’s needs using a measuring cup. Mixing errors excluded Technical data in combination with FRANKOSIL® 1K Plus One bottle of FRANKOSIL Turbo Shot® is sufficient for a 6 kg container of FRANKOSIL® 1K Plus. Processing time approx. 15 min* Rainproof after approx. 30...

Open the catalog to page 3

FRANKEN SYSTEMS GmbH Südstraße 3 I 97258 Gollhofen I Germany T +49 9339 988 69 – 0 F +49 9339 988 69 – 99 E [email protected] www.franken-systems.de Follow us on Facebook and Instagram 08-2021 Technical changes, errors and misprints may occur. FRANKEN SYST

Open the catalog to page 4

FRANKOSIL® - goes off like a rocket.

FRANKOSIL® - goes off like a rocket.

Catalog excerpts

All FRANKEN SYSTEMS GmbH catalogs and technical brochures