Time Switches Models 5T and 15T The 5T and 15T time switches can be wired for an open or closed circuit when time expires. They require no electrical current to operate and have an SPDT contact arrangement. These switches feature a precision movement that gives years of reliable service. The switches’ precision movement can be set to zero anytime, and a built-in stop prevents overwinding. The 5T (5 minute) and 15T (15 minute) timers mount directly in control panels for short range timing with manual reset. These switches are perfect for disconnecting shutdown circuits while equipment is being started. The 5 or 15 minute switch allows a short interruption of gage circuits on test or start up. Mounted in a panel away from vibration and shock, these time switches give accurate, longterm service. All trademarks and service marks used in this document are the property of their respective owners. This Enovation Controls product is exclusively distributed by FW Murphy in the Natural Gas Compression Market. Range: 5T: 0-5 minutes 15T: 0-15 minutes Operating Temperature Range: 32° to 185° F (0° to 85° C) Contact (all models): SPDT, rated 5 A @ 480 VAC; 10 A @ 250 VAC; 15 A @ 48 VDC In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time. FW MURPHY product names and the FW MURPHY logo are proprietary trademarks. This document, including textual matter and illustrations, is copyright protected with all rights reserved. (c) 2020 FW MURPHY. A copy of our typical warranty may be viewed or printed by going to www.fwmurphy.com/warran

Typical Wiring Refer to Product Markings