*mydirectindustry

Nippydry

Product catalog summary

Introduction
The document provides an installation guide for air compressors, focusing on the preparation of air by filtering out contaminants such as heat, moisture, and dirt. It adheres to the ISO 8573.1 standard.

Air Preparation Process
The process involves several components: a screw compressor, auto drain valve, micro filters, refrigeration dryer, and air receiver. The aim is to ensure the air is clean and dry before use.

Correction Factors
Correction factors are provided for inlet air temperature, inlet pressure, and ambient temperature. These factors are crucial for determining the required dryer capacity.

How to Order
An example is given for ordering a dryer with specific requirements: inlet flow of 100 scfm, working pressure of 5 Kg/cm², inlet temperature of 45°C, and ambient temperature of 38°C. The calculation results in a required dryer capacity of 119 scfm, recommending the Nippydry 150 model.

Dryer Specifications
The document lists specifications for various Nippydry models, including flow capacity, power consumption, connection size, dimensions, weight, and maximum working pressure.

Principle of Operation
The Nippydry dryer operates by cooling warm compressed air, condensing water into droplets, and removing them via a demister and automatic drain valve. The air is then reheated before exiting.

Desiccant Compressed Air Dryers
Specifications for Dryspell and Dryspell Plus models are provided, detailing maximum working pressure, air inlet conditions, recommended pre-filter, cycle time, regeneration volume, and air outlet conditions.

Compressed Air Filters
Technical data for various filter models are included, specifying element grade, flow capacity, pressure, pipe size, and dimensions. The document also describes the filter element materials and particle removal capabilities.

Automatic Drain Valves
Specifications for different series of automatic drain valves are provided, including maximum working pressure, valve orifice size, timing cycle, and environmental protection.

Contact Information
Contact details for Frank Technologies Pvt. Ltd. and their sales and service network across various cities in India are listed.

Catalog excerpts

Installation Guide ISO 8573.1 Air Receiver Refrigeration Dryer Screw Compressor Auto drain valve The air produced by a compressor is HOT, WET and DIRTY. The first step in GOOD AIR preparation is to FILTER out these CONTAMINANTS.

Open the catalog to page 1

• Dewpoint +30C • Designed for high ambient temperatures • Time delay for compressor safety Principle of Operation - Nippydry Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +30C. At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Automatic Drain Valve. The Cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger...

Open the catalog to page 2

Maximum Working Pressure Air Inlet Condition Recommended Pre-filter After filter Cycle Time Regeneration Volume Air Outlet Conditions Operating Voltage Desiccant Compressed Air Dryers - DRYSPELL / DRYSPELL PLUS 16 kg / cm2 Maximum Fluid Temp 45oC 0.01 Microns (Coalescer) In built 25 micron (within the diffuser screen or compactor plate) 4 Minutes 12% Dryspell / 14% Dryspell Plus Dry air at -40oC Dew Point ADP for Dryspell, PDP for Dryspell Plus 100 - 240 V Ac 50/60 hz 1 Ph Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell Dryspell 10 Plus Plus...

Open the catalog to page 3

Automatic Drain Valves Timer Type - CTD Specifications : Voltage Inlet & Outlet Pressure Valve Orifice Timing Compressor Capacity 230 V AC / 50 Hz / 1 Ph 1/2" BSP (F) 2 - 16 bar (g) 4 mm Cycle : 1 min to 60 min Adjustable Drain : 1 sec to 20 Sec Upto 500 cfm Automatic Drain Valves - LDV Specifications Maximum Working Pressure Minimum Working Pressure Capacity End connection Inlet & Outlet Voltage Automatic Drain Valves - Series EDV-X Specifications Sales & Service Network Frank Technologies Pvt. Ltd., SF No.570/4A-4B, Kurudampalayam, K. Vadamadurai Post, Coimbatore - 641 017. India. Telefon :...

Open the catalog to page 4

Nippydry

Nippydry

Catalog excerpts

All Frank Compressors catalogs and technical brochures