*mydirectindustry

Compacta

Product catalog summary

Technical Description
COMPACTA gear motors by Framo Morat are compact motors with integrated gearing stages designed for mechanical handling and automation. They offer customizable options with torque ranging from 10 Nm to 1600 Nm and speeds from 193 rpm to 1 rpm.

Special Features
The motors feature a 30-40% weight reduction due to aluminum vacuum die casting, small dimensions, high power density, and optional integrated limit switches for precise positioning tasks.

Motors
Available in various voltages and frequencies for single-phase, 3-phase AC, and 24 DC, these motors include thermal protection and have an enclosure rating of IP 54, insulation class B.

Duty Cycle
Designed for intermittent forward/reverse applications with a maximum duty rating of 60%. Cooling fans are available for higher duty cycles.

Limit Switches
Optional integrated limit switches are ideal for reversing operations, with adjustable settings for precise control.

Conditions of Use
Not suitable for environments where human safety is at risk or explosive environments. Operating temperatures should be between 0°C and 60°C.

Self-locking
Self-locking is influenced by various factors and is not a substitute for a brake. A positive brake is recommended for safety.

Lifetime
The drive is maintenance-free with lifetime lubrication. The lifetime depends on application conditions.

Options
Includes internal limit switches, linear potentiometer, encoder, cooling fan, hand crank, motor brake, and more.

Cooling and Ventilation Features

Cooling fan or forced ventilation fan for frequency inverter control.
Hand crank with electrical protection for emergency operation.
Spring actuated, electrically released motor brake for precise positioning.
Armature cone brake and adjustable slip clutch for Type MS12.
Anti-corrosion treatment for rotor/stator and drainage holes for condensed water.
Stainless steel hollow shaft available for Type MS12 or MR30.
Reinforced first stage gear recommended for high duty cycle reverse drive applications.

Technical Specifications

Output speed and torque vary with transmission ratio and motor speed.
3-phase motors operate at 3x230/400V-50Hz, single-phase motors at 1x230V-50Hz, and 24V DC permanent magnet motors are available.
Self-locking options include no self-locking (So), static self-locking (Ss), and dynamic self-locking (Sd).
Operational torques for single-phase motors are between 30% and 60% of catalog specifications.
Gear motors can be overloaded by 50% for brief periods.

Environmental Considerations

Contact manufacturer for operations below 0°C or above 40°C, or in conditions of strong vibrations.

Spare Parts

Comprehensive list of spare parts including motor cover, rotor + stator, radial shaft seals, bearings, gears, and limit switches.
Spare parts require the serial number for supply.

Dimensions and Mounting

Standard drive configurations available with 3-phase and single-phase motors.
Options for motor brake, rotor fan, and various mounting surfaces.

Operational Guidelines

Motors can be overloaded by 50% for brief periods.
Contact the manufacturer for operations outside standard temperature ranges or under strong vibrations.

Technical Questionnaire

Includes questions on application, output speed/torque, operating voltage, and environmental conditions.
Designed to assist in providing detailed quotations and ensuring appropriate motor selection.

Connection Diagrams

Various versions of built-in limit switches and connection plans are provided.

Catalog excerpts

Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 1

Slip-on geared motor COMPACTA Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 2

Slip-on geared motor COMPACTA Technical Description Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 3

Slip-on geared motor COMPACTA Technical description 1. Design COMPACTA gear motors fromFramo Morat are, as the name implies, extremely compact dimensioned motors with integrated two, three or four stage gearing to produce the output speed and torque required in an application. Each COMPACTA is manufactured to the precise specifications ordered by the customer from the wide range of motor types, gear ratios and optional features shown in this catalogue. COMPACTA gear motors are used mainly in mechanical handling, automation and special machines where torque requirements may vary from 10 Nm up...

Open the catalog to page 4

Slip-on geared motor COMPACTA Power relays Version 00 Terminal box (box without switch mechanism) Limit switch version 1 (not MR6) for applications with defined stops in both directions, protected by 2 safety switches, with integrated power relays. Linear potentiometer Limit switch version 2 (not MR6) for applications with defined stops in both directions, protected by 2 safety switches, without integrated power relays. Limit switch version 2P (not MR6) for applications with defined stops in both directions, protected by 2 safety switches. Additional potentiometer signal for positioning. Subject...

Open the catalog to page 5

Slip-on geared motor COMPACTA 6. Conditions of use It is a condition of sale that Framo Morat gear motors shall not be used for the movement of loads whereby persons can be directly or indirectly endangered. The use of Compacta rotary actuators in equipment which is intended for the transport of passengers is only permissible after prior written consultation and the agreement of the manufacturer (Framo Morat) or their representatives. Don't use this drive in explosive environments. Avoid environmental temperatures below 0°C and above 60°C. We refer users of gear motors to safety rules, regulations...

Open the catalog to page 6

Slip-on geared motor COMPACTA Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 7

Slip-on geared motor COMPACTA Additional output table information: *So = No self-locking Ss = Static self-locking Sd = Dynamic self-locking ** The stated single-phase torques are operational torques. The starting torque, depending on application, is between 30% and 60% of the stated catalog specification. Please contact the manufacturer in case max. torque is required. The gear motor can be overloaded by 50% for brief periods. Single-phase AC and DC motors may stall. The output speed of Compacta gear motors with DC motors varies with the output torque. Please contact the manufacturer in case...

Open the catalog to page 8

Slip-on geared motor COMPACTA Dimensions Standard drive with 3-phase and single-phase motors Limit switch or terminal box 4x M8/15 mm deep on both sides Hollow shaft 4x M8 15 deep Mounting surfaces Gearbox DC-motor (option) Motor brake (option) Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 9

Slip-on geared motor COMPACTA Designation Motor cover Rotor + stator Radial shaft seal Deep-groove ball bearing Idler gear Spur gear Worm shaft Axial bearing Screw Gearbox cover Gearbox case Worm gear Limit switch cover Limit switches compl. Radial shaft seal Deep-groove-ball bearing Cover seal Flat seal Spare parts can only be supplied if the serial number is stated Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 10

Slip-on geared motor COMPACTA Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 11

Slip-on geared motor COMPACTA Max. limit switch range; output rotation The output speed of Compacta gear motors with DC motors varies with the output torque. Additional output table information: *So = No self-locking Ss = Static self-locking Sd = Dynamic self-locking ** At 100% duty cycle (continuous operation) cooling is always required. With cooling, motors rated with 60% duty can be operated at 100% duty. *** The stated single-phase torques are operational torques. The starting torque, depending on application, is between 30% and 60% of the stated catalog specification. Please contact the...

Open the catalog to page 12

Slip-on geared motor COMPACTA Dimensions Standard drive with 3-phase or single-phase motor flat cover Tapped hole M16x1,5 Tapped hole M20x1,5 4x M8 12 deep on both sides Limit switch version 2 without power relay (option) or terminal box (without switch mechanism) Hollow shaft Motor with motor brake (option) with rotor fan (option) Limit switch version 1 with power relays, (options) high cover with rotor fan and motor brake or just motorized fan (option) with motor brake and motorized fan (option) Some options may be combined Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße...

Open the catalog to page 13

Slip-on geared motor COMPACTA Hand crank with elec. interlock (option) (removable) with DC motor (option) (crank engaged) with DC motor and motor brake (option) with integrated cone brake (only with single- and 3-phase AC motor) (option) with stub shaft (option) (left or right) with slip clutch (option) Keyway DIN 6885/1 Adjustment of slipping torque up to max. 90 Nm useable shaft length Some options may be combined Subject to technical changes Framo Morat GmbH & Co. KG Franz-Morat-Straße 6 • D-79871 Eisenbach www.framo-morat.com [email protected]

Open the catalog to page 14

Compacta

Compacta

Catalog excerpts

All Framo Morat catalogs and technical brochures

Archived catalogs