1. Catalogs
  2. fral
  3. SERIE DRP - DRC 2025
video corpo

SERIE DRP - DRC 2025
1 /6Pages

SERIE DRP - DRC 2025

SERIE DRP - DRC 2025
1 /6Pages

Catalog excerpts

SERIE DRP - DRC 2025-1

Devices, capable of dehumidify air and avoid the moistness condensation on the floor and dehumidifier-conditioners, i.e. dehumidifiers capable if necessary of lowering temperature of the treated air thanks to an innovative system. MODELS: Wall flush mounted: DRCC 33 DRCC 33 NA DRCC 33 DC DRC 66 DRC 66 NA DRC 66 DC APPLICATIONS: The DRC and DRP series of dehumidifiers are used for moisture control where there is a cooling system with radiant panels. The dehumidifiers of the series DRP and DRC have standard battery of pre-and post-cooling, dehumidifiers are isothermal. The NA version is a normal dehumidifier that works without connecting to the chilled water circuit. The DC version can also work in cooling mode always combined with the dehumidification in order to ensure optimum control of temperature also. The devices are particularly quiet, ducted versions are provided of the intake and discharge and delivery plenums.

 Open the catalog to page 1
SERIE DRP - DRC 2025-2

DATA SHEET - MODEL DRP WALL FLUSH MOUNTED

 Open the catalog to page 2
SERIE DRP - DRC 2025-3

ACCESSORIES - MODEL DRP WALL FLUSH MOUNTED FEATURES - MODEL DRP WALL FLUSH MOUNTED Dehumidifiers serious DRP consist of a body made of hot galvanized steel with removable panels for easy inspection and maintenance. The frame is pre-assembled, has brackets for fixing to the masonry. I the compressor is of type alternative hermetic , with the thermal protection device and acoustic insulation, is mounted on vibration dampers to reduce the vibrations. Performs defrost control, the delay of the compressor and manages alarms through electronic control (deu-climate version) Low water pressure switch,...

 Open the catalog to page 3
SERIE DRP - DRC 2025-5

DIMENSIONS AND WEIGHT - - MODEL DRC DEHUMIDIFIER & COOLER TO CEILING • standard o optional x no available FEATURES - MODEL DRC DEHUMIDIFIER & COOLER TO CEILING Dehumidifiers serious DRC consist of a body made of hot galvanized steel with removable panels for easy inspection and maintenance. The frame is pre-assembled, has brackets for fixing to the masonry. I the compressor is of type alternative hermetic , with the thermal protection device and acoustic insulation, is mounted on vibration dampers to reduce the vibrations. Performs defrost control, the delay of the compressor and manages alarms...

 Open the catalog to page 5
SERIE DRP - DRC 2025-6

TECHNICAL REFERENCE The fan inside the model DRC is centrifugal type impeller with This dehumidifier meets the essential requirements contained in d. 144 mm. Fan Motor with capacitor and switch to 6 speed. the European Community Directive 2006/95/EC of 12 December 2006 on the safety of electrical products for use in low voltage, 2004/108/EC of 15 December 2004 relating to Electromagnetic Made of synthetic material made of polypropylene, the air filter is washable and easy to replace. It is mounted on wooden grid. machinery. Conformity harmonized standards: CEI-EN 60335-2-40, IEC-EN 55014-1, CEI-EN...

 Open the catalog to page 6
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.