SENSOR SOLUTIONS FOR DOORS
12Pages

SENSOR SOLUTIONS FOR DOORS 100 Years of FRABA Group

APPLICATION OVERVIEW Safety Light Curtain RAY-LG Pedestrian Door Switch ENTRYSENSE Non-Contact Edge Safety Edge OPTOEDGE P hoto Eyes RAYTECTOR, RAY-M, RAY-RT, RAY-N VITECTOR Finders – Product Selection Made Easy ▪▪ Access by all Mobile Devices, No Special App Needed ▪▪ Find the Right VITECTOR Sensor on the Go ▪▪ Product Documentation Accessible with a Few Clicks Sensor Solutions

Opto-Electronic Safety Edge – OPTOEGDE OPTOEDGE consists of infrared sensors plugged The DiagnOSE from VITECTOR supports the tech- into the circular chamber of a rubber extrusion nician during installation and maintenance of optical profile. By pressing the rubber profile, the hollow safety edges, showing intensity levels and operati- chamber collapses and disrupts the light beam. The control unit then converts this signal to a safe relay output which can be directly implemented into All VITECTOR OSE Sensors run a self-test pro- a safety loop. To monitor a large amount of edges gram on each...

on-Contact Door Safety System – RAY-NC / RAY-NC-SD N RAY-NC is the next generation of Non-Contact Edges. Due to its smart, self-adjusting software ▪▪ Non Contact, Means no Force Measurement RAY-NC adapts to its environment making it work independently from the door design. The sensor re- liably detects every type of reflection, which allows ▪▪ Unaffected by Reflection and Sunlight retrofitting to any door. It is user friendly and easy ▪▪ Resistant against Vibration and Misalignment to install since it is resistant against vibration and ▪▪ Easy Customization for OEM Solutions misalignment....

Wireless Gateway Set – WGS The Wireless Gateway Set consists of a stationary Gateway and up to six mobile satellites, linked via radio transmission. Features ▪▪ ireless Communication via 2.45 Gigahertz W Radio Waves The wireless data transmission system makes coil cables and energy chains obsolete. The wireless radion technology guarantees a safe and energy ef- ▪▪ eplaces Coil Cables or Energy Chains R Between Door Panels and Door Controller ▪▪ odes of Operation M ficient communication between all connected com- ponents. The data transmission is encrypted using - Activation on Test Input -...

Impact-Resistant Photo Eye – OPTOEYE Monitored Photo Eye – RAY-N The OPTOEYE consists of two infrared sensors RAY-N is a monitored photo eye using a 2-wire in- inserted into flexible rubber brackets, which are terface. When the signal between transmitter and mounted next to the door opening. Installation is receiver is interrupted, the sensor sends a signal very easy since the LEDs indicate alignment and to the operator to stop and reverse the door. The- power. The OPTOEYE is specifically designed to se sensors are long range (14 m), yet designed for withstand rough commercial and...

Reflective Photo Eye – RAY-RT With its adaptable design, RAY-RT can be installed in the most challenging locations of door and gate ▪ Available with Standard or Long-range Reflector construction. It is designed for securing various ▪ Resistant to Ambient Light Through Red Light points of the door and due to its compact size it can even be integrated in the guide rail. RAY-RT is available in 2 different output versions typical for Technology ▪ Close Range Detection (See Triangulation Feature) the door and gate industry (relay and 2-wire pulsed ▪ Available Output Versions: Relay, Pulsed 2-wire...

Threaded Photo Eye – RAY-M / RAY-M DUO Pre-traveling Light Barrier – OPTOGUARD RAY-M was designed as a light barrier for a small OPTOGUARD is a pre travelling non-contact light mounting space. It generates the standard OSE barrier best suited for doors with wide profiles, signal and can be operated in combination with e.g. used in sectional doors with low threshold wi- well known control units. The RAY-M DUO is a cket door. OPTOGUARD features two telescopic double beam light barrier for safeguarding of two sledges, each of them carrying a pair of photocell parallel areas via one signal....

Pull-in Protection – RAYTECTOR Safety Light Curtain – RAY-LG RAYTECTOR is used to safeguard pinch-points on RAY-LG is an ultra-compact safety light curtain that automatic gates and rolling grills. A pull-in protection uses infrared beams to create a monitored field. monitors the shearing-edge and by disrupting the When the infrared beams are interrupted, the sys- light barrier, the hazardous movement is stopped. tem outputs a signal to the connected door controller. As soon as the detection area is clear again, the output switches to indicate that the area is “clear”. ▪▪ Pull-In Protection...

Slack Cable Switch – SCS Pedestrian Door Switch – ENTRYSENSE The SCS slack cable switch is designed to detect Pedestrian doors in automatic gates have to be se- a slack cable on e.g. a sectional door, which is ob- curely latched for each door operation. The pedest- structed in its movement and to stop the operator rian door switch ENTRYSENSE fulfils the require- in time. The EN 12453:2017 requires, that such a ments of safety category 2 / PL c according to EN device shall fulfil EN ISO 13849-1 PL „c“ category 2. The new VITECTOR SCS switch combines two ENTRYSENSE is available with various...

To have a complete safe guarding system you may DW pneumatic switches are actuated by pressu- also need a few more componments: a control unit re waves created by any kind of pressure source. which processes the signal of the sensing edge and When the pneumatic edge hits an obstacle, a pres- controls the dignal out put as well as durable coiled sure wave is created inside of the tube and this wave is recognized by the switch. ▪▪ Works with Positive or Negative Pressure ▪▪ Normally Open & Closed Contacts Available ▪▪ Factory-Calibrated, Simple Assembly ▪▪ Junction Boxes ▪▪ Offset Brackets ▪▪...

SENSOR SOLUTIONS FOR DOORS FRABA Group first non-contact, optical absolute rotary encoders FRABA is a group of enterprises focused on pro- was produced in the FRABA offices in Cologne. In viding advanced products for the motion control 1994 the first optical safety edge was launched by and industrial automation markets. VITECTOR VITECTOR. Today, FRABA companies specialize is a leading manufacturer and supplier of safety in innovative products that use advanced technol- systems for the door and gate market in the USA, ogies to deliver exceptional performance and value. Europe, and around the...