General Technical Data
The OSE-C 2324 control unit is designed for surface mounting and operates with a 3-wire sensing edge input. It features relay NCC outputs, with additional stop output (NCC) and reverse contact (NOC). The unit requires a supply voltage of 24 V AC/DC and operates within a temperature range of -20 °C to +55 °C. It weighs 0.36 kg and is housed in polycarbonate with an IP65 protection class. The dimensions are 130x94x60 mm, and it consumes 7 VA of power.

Safety Properties
The unit complies with Safety Category 3 PL d (EN 13849-1) and has an MTTFd of 44 years with a diagnostic coverage of 88%.

Sensing Edge Output
The output type is an NCC relay made of hard silver, AgNi, with a maximum switching voltage of 250 V AC/DC and a current load of 4 A. It has a mechanical service life of 10 million operating cycles and requires a 4 A slow-acting fuse.

Reverse Output
This output is a relay NOC with similar contact material, supporting a maximum switching voltage of 250 V AC / 24 V DC and a current load of 6 A. It has a mechanical service life of 20 million operating cycles and requires a 6 A slow-blowing fuse.

Stop Output
The stop output is also a relay NCC with the same contact material, supporting a maximum switching voltage of 250 V AC / 24 V DC and a current load of 6 A. It has a mechanical service life of 10 million operating cycles and requires a 6 A slow-blowing fuse.

Compatible OSE Sensors
The document lists various compatible OSE sensors with different cable lengths for T and R cables, ranging from 0.5 m to 10.5 m.

Contact Information
For further inquiries, contact CEDES AG at [email protected]. Note that all dimensions are provided in both inches and millimeters, and specifications are subject to change without notice.