General Technical Data
The OSE-C 2301 control unit is designed for surface mounting and operates with a 3-wire sensing edge input. It features relay NCC outputs and additional reverse contact outputs (NOC). The unit requires a supply voltage of 24 V DC and operates within a temperature range of -20 °C to +55 °C. It weighs 0.36 kg and is housed in polycarbonate with an IP65 protection class. The dimensions are 130x94x60 mm, and it consumes 2.8 VA of power with a cyclic duration factor of 100%. It supports two optical sensing edge inputs.

Safety Properties
The unit complies with Safety Category 3 PL c according to EN 13849-1, with an MTTFd of 48 years and a diagnostic coverage of 60%.

Sensing Edge Output
The output type is an NCC relay made of hard silver (AgNi), with a maximum switching voltage of 250 V AC / 60 V DC and a current load of 4 A. The maximum switching capacity is 1000 VA, and it has a mechanical service life of 20 million operating cycles. A 4 A slow-acting fuse is recommended but not included.

Reverse Output
The reverse output is a relay NOC, also made of hard silver (AgNi), with a maximum switching voltage of 250 V AC / 24 V DC and a current load of 6 A. The maximum switching capacity is AC15: 230 V / 2 A; DC13: 24 V / 3 A, with a mechanical service life of 20 million operating cycles. A 6 A slow-blowing fuse is recommended but not included.

Compatible OSE Sensors
The document lists various compatible OSE sensors with their respective T and R cable lengths, ranging from 0.5 m to 10.5 m.

Contact Information
For further inquiries, contact CEDES AG at [email protected]. Note that all dimensions are provided in both inches and millimeters, and detailed technical drawings are available in the "Download" section. Specifications are subject to change without notice.