General Technical Data
The OSE-C 2300 control unit is designed for surface mounting and operates with a 3-wire input type of sensing edge. It features relay NCC outputs and additional reverse contact outputs (NOC). The unit requires a supply voltage of 230 V AC and operates within a temperature range of -20 °C to +55 °C. It weighs 0.36 kg and is housed in a polycarbonate material with protection class IP65. The dimensions are 130x94x60 mm, and it consumes 2.8 VA of power with a cyclic duration factor of 100%. It supports two optical sensing edge inputs.

Safety Properties
The unit complies with Safety Category 3 PL c according to EN 13849-1, with an MTTFd of 48 years and a diagnostic coverage of 60%.

Sensing Edge Output
The output type is an NCC relay made of hard silver, AgNi. It supports a maximum switching voltage of 250 V AC / 60 V DC, a maximum current load of 4 A, and a maximum switching capacity of 1000 VA. The mechanical service life is 20 million operating cycles, and it requires a 4 A slow-acting fuse (not included).

Reverse Output
The reverse output is a relay NOC with similar contact material. It supports a maximum switching voltage of 250 V AC / 24 V DC, a maximum current load of 6 A, and specific switching capacities for AC15 and DC13. The mechanical service life is also 20 million operating cycles, requiring a 6 A slow-blowing fuse (not included).

Compatible OSE Sensors
The document lists various compatible OSE sensors with their respective T and R cable lengths, ranging from 0.5 m to 10.5 m.

Contact Information
For further inquiries, contact CEDES AG at [email protected]. Note that all dimensions are provided in both inches and millimeters, and detailed technical drawings are available in the "Download" section.