Catalog excerpts
Product data sheet TSHK 670...672: Fan-coil room-temperature controller, heating/cooling sequence How energy efficiency is improved Enables controlling of HVAC components according to needs. Room temperature can be set as the setpoint using the printed temperature scale Gradual transition from heating to cooling through sequence characteristic Variants with master switch plus slide switch for the fan Suitable for wall mounting or fitting on recessed junction boxes Electronics unit and switching relay Setpoint adjuster with mechanical min. and max. limitation of the setting range Quasi-continuous temperature control Two-point pulsed activation Individual unitary temperature control in residential and business rooms for activating e.g. electric heating systems, thermal actuators, or fans or cooling units in air-conditioning systems. Technical data Power supply Power supply Parameters Setting range Proportional band Sequence dead zone Shortest switching interval Time constant in still air Dead time in still air Time constant in moving air (0.2 m/s) 15 min Dead time in moving air (0.2 m/s) Admissible ambient temperature Operating mode Ambient conditions Construction Housing Housing material Fire-retardant thermoplastic (fire classification UL94 HB) Black thermoplastic with NTC sensor Cable inlet Screw terminals Standards and directives Type of protection Energy class Protection class The device is pulsed electronically. When the temperature increases, the control factor is reduced to 0 on the “Heating” output and increased to E = 1 on the “Cooling” output. A small temperature variation of ±0.1...0.5 K occurs as a result of pulsing, depending on the time constant of the room Right of amendment reserved
Open the catalog to page 1Product data sheet Overview of types Type Mains switch ON/OFF Accessories Type Pure white intermediate cover plate, suitable for various recessed junction boxes Description of operation The room temperature is measured by an internal NTC temperature sensor and compared with the setpoint applied. Depending on the temperature deviation, an electrical switching relay is activated. When the setpoint is reached, the switch moves to the middle position “Off”. The operating points of the controller are determined by the setpoint, the dead zone and the proportional band. Intended use This product...
Open the catalog to page 2Product data sheet Dimension drawing Fr. Sauter AG Im Surinam 55 CH-4016 Basel Tel. +41 61 - 695 55 55 www.sauter-controls.com Right of amendment reserved © 2015 Fr. Sauter AG
Open the catalog to page 3All Fr. Sauter AG catalogs and technical brochures
-
SAUTER Catalogue
551 Pages
-
HSC 120: Room humidistat
3 Pages
-
SAUTER AXT2 and AXS2.
8 Pages
-
Ball valve and actuator.
6 Pages
-
SAUTER Valveco compact
8 Pages
-
Valves and actuators.
32 Pages
-
SAUTER vialoq AVM 100
2 Pages
-
ASM 134: Damper actuator
4 Pages
-
SAUTER flexotron ® 400
4 Pages
-
EXG: Active potentiometer
2 Pages
-
flexotron ® 2000
2 Pages
-
SAUTER flexotron800
8 Pages
-
EQJW 24
8 Pages
-
NRT 101
8 Pages
-
Thermowells
6 Pages
-
Indoor air quality
8 Pages
-
SAUTER EGQ
4 Pages
-
SAUTER equiflex ® NRT300
4 Pages
-
SAUTER HSC/HBC humidistats
2 Pages
-
DSA: Pressure switch
4 Pages
-
TFL 201
3 Pages
-
TUC: Universal thermostat
5 Pages
-
TLC
2 Pages
-
TSHK 621...643
4 Pages
-
TSO, TSH: Room thermostat
4 Pages
-
RAK: Universal thermostat
5 Pages
-
SAUTER FACTS
28 Pages
-
Pressure transducer
3 Pages
-
Air-flow transducer
2 Pages