Thermowells

Thermowells

Thermowells

Product catalog summary
Overview: Thermowells are accessory components designed for sensors and thermostats to facilitate quick and efficient temperature measurement, thereby optimizing energy usage. They are installed in pipes and containers to hold sensor cartridges, immersion stems, temperature sensors, controllers, or thermostats.
Features:
  • Constructed from brass or stainless steel.
  • Available with cylindrical or cone-shaped threads.
  • Equipped with a pressure spring for certain models.
Specifications:
  • Stainless steel models can withstand up to 40 bar nominal pressure and 60 bar test pressure, with a maximum temperature of 325°C or 450°C depending on the type.
  • Brass models can handle up to 10 bar nominal pressure and 16 bar test pressure, with a maximum temperature of 160°C.
Types and Applications:
  • Various lengths available, ranging from 50 mm to 600 mm.
  • Specific models are designed for use with TUC thermostats only.
  • Thermowells must be used with fluids that are non-hazardous to humans, animals, and the environment.
Engineering Notes:
  • Flow rates must be controlled to prevent excessive vibration and potential material fatigue.
  • Thermowells should be earthed according to application requirements and local regulations.
Disposal: Disposal must comply with local laws, and further material information is available in the product's environmental declaration.
Accessories:
  • Retaining holders, welding sleeves, and pressure springs are available as accessories.
See more

Catalog excerpts

Thermowells-1

Product data sheet Thermowells How energy efficiency is improved Accessory component for sensors and thermostats for quick measurement that enable energy to be used according to needs. Features • To be fitted in pipes and containers for holding sensor cartridges, immersion stems, temperature sensors, temperature controllers or thermostats • Made of brass (Ms) or stainless steel (V4A) • Versions with cylindrical pipe thread (G½" male ISO 228/1, flat-sealing)1) or cone-shaped (R½" ISO 7/1 sealing in thread) • With pressure spring (LW 15) Overview of types Type Nominal pressure Test pressure Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel Stainless steel 0392022100 and 0392022300 for TUC thermostats only Only use the supplied thermowells or stainless-steel thermowells (part nos.: 0393022*** or 0392022***) with TUC407F001 and TUC207F003. Accessories Type Retaining holder for cable temperature sensor or capillary tube with 0392022*** (LW 7 or 15) (10 pieces) Welding sleeve of steel, with female thread G½", flat seal of copper Pressure spring for LW 15 (10 pieces) G½" male ISO 228/1, flat-sealing: for welding bushings with flat seal (accessories)

 Open the catalog to page 1
Thermowells-2

Product data sheet 0392022100 and 0392022300 for TUC thermostats only Only use the supplied thermowells or stainless-steel thermowells (part nos.: 0393022*** or 0392022***) with TUC407F001 and TUC207F003. Only use the thermowells (LW 15) with at least 2 sensors or thermostats with a diameter of at least 6 mm. Description of operation Thermowell for sensors and thermostats to be fitted in pipes and containers for holding sensor cartridges, immersion stems, temperature sensors, temperature controllers or thermostats. The thermowells are components in accordance with the Pressure Equipment Directive...

 Open the catalog to page 2
Thermowells-3

Product data sheet Only use the thermowells (LW 15) with at least 2 sensors or thermostats with a diameter of at least 6 mm. The thermowells must be earthed according to the intended application or the local regulations for fitting. Disposal When disposing of the product, observe the currently applicable local laws. More information on materials can be found in the Declaration on materials and the environment for this product. Silicone ring Material: Silicone Pressure screw M12x1,5 Material: PA/GK Right of amendment reserved © 2016 Fr. Sau

 Open the catalog to page 3
Thermowells-4

Product data sheet Right of amendment reserved © 2016 Fr. Sauter AG

 Open the catalog to page 4
Thermowells-5

WSAUTER Right of amendment reserved © 2016 Fr. Sauter AG

 Open the catalog to page 5
Thermowells-6

Product data sheet WSAUTER Right of amendment reserved © 2016 Fr. Sauter AG

 Open the catalog to page 6

All Fr. Sauter AG catalogs and technical brochures

  1. SAUTER Catalogue

    551  Pages

  2. EQJW 24

    8  Pages

  3. NRT 101

    8  Pages

  4. SAUTER EGQ

    4  Pages

  5. TFL 201

    3  Pages

  6. TLC

    2  Pages

  7. TSHK 670...67

    3  Pages

  8. SAUTER FACTS

    28  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.