Catalog excerpts
Product data sheet DSA: Pressure switch How energy efficiency is improved Control and monitoring according to needs and with no auxiliary energy. For regulating and monitoring pressure in liquids, gases and vapours Especially suitable for applications in compact installations Upper switching point can be set Fixed switching difference, no hysteresis setting is necessary Sealable Pressure sensor made of brass for non-aggressive media Technical data Power supply 400 mA, 24 V, 10 VA Minimum load with gold-plated contacts Maximum load with silver-plated con- 10(4) A, 250 V~, 50 W, 250 V= tacts Maximum load with gold-plated contacts1) Minimum load with silver-plated con- 100 mA, 24 V tacts 3 2 Pressure connection Admissible sensor temperature Admissible ambient temperature Pipe and wall mounting Transparent cover Ambient conditions Housing material Impact-proof thermoplastic Housing-mounted plug Standard plug with female cable connector for cable of Ø 6...10 mm Standards and directives Protection class Machine directive 2006/42/EC (according to appendix IIB) Overview of types Type Setting range Switching difference Maximum pressure Admissible vacuum loading DSA: Pressure sensor made of brass for non-aggressive media; Xs = upper switching point If the contacts are subjected to a load greater than specified, the gold plating will be destroyed. They are then classed merely as silver contacts and lose the properties of gold-plated contacts Depending on the fitting position, see the fitting instructions. The devices are not suitable for outdoor applications. Excluded from the directive on pressure equipment 97/23/EC (as per Art. 1.3.6) Right of amendment reserved © 2014 Fr. Sau
Open the catalog to page 1Product data sheet Accessories Type Throttle screw for absorbing pressure surges, brass Cap nut with solder connector 1 m capillary tube for absorbing pressure surges, copper Throttle screw for absorbing pressure surges, stainless steel Reduction piece G½" on 7/16" 20-UNF-2A for copper tubes of Ø 6 mm, brass Setpoint adjuster according to customer's wishes (setting accuracy: ±3% of the setting range, but a minimum of ±0.2 bar) Setpoint adjuster sealed (with accessory 0292001 only) Damping screw for absorbing pressure surges in low viscosity media Fixing bracket for wall mounting Fixing...
Open the catalog to page 2Product data sheet Materials Materials that come into contact with the medium: Pressure sensor made of brass (DSA): brass, stainless steel, nitrile rubber. Disposal When disposing of the product, observe the currently applicable local laws. More information on materials can be found in the Declaration on materials and the environment for this product. Dimension drawing Right of amendment reserved © 2014 Fr. Sauter AG Connection diagram
Open the catalog to page 3Product data sheet Fr. Sauter AG Im Surinam 55 CH-4016 Basel Tel. +41 61 - 695 55 55 www.sauter-controls.com Right of amendment reserved © 2014 Fr. Saute
Open the catalog to page 4All Fr. Sauter AG catalogs and technical brochures
-
SAUTER Catalogue
551 Pages
-
HSC 120: Room humidistat
3 Pages
-
SAUTER AXT2 and AXS2.
8 Pages
-
Ball valve and actuator.
6 Pages
-
SAUTER Valveco compact
8 Pages
-
Valves and actuators.
32 Pages
-
SAUTER vialoq AVM 100
2 Pages
-
ASM 134: Damper actuator
4 Pages
-
SAUTER flexotron ® 400
4 Pages
-
EXG: Active potentiometer
2 Pages
-
flexotron ® 2000
2 Pages
-
SAUTER flexotron800
8 Pages
-
EQJW 24
8 Pages
-
NRT 101
8 Pages
-
Thermowells
6 Pages
-
Indoor air quality
8 Pages
-
SAUTER EGQ
4 Pages
-
SAUTER equiflex ® NRT300
4 Pages
-
SAUTER HSC/HBC humidistats
2 Pages
-
TFL 201
3 Pages
-
TUC: Universal thermostat
5 Pages
-
TLC
2 Pages
-
TSHK 670...67
3 Pages
-
TSHK 621...643
4 Pages
-
TSO, TSH: Room thermostat
4 Pages
-
RAK: Universal thermostat
5 Pages
-
SAUTER FACTS
28 Pages
-
Pressure transducer
3 Pages
-
Air-flow transducer
2 Pages