Catalogs >
Fr. Sauter AG >
B2KL: 6-way ball valve with male thread, PN16

B2KL: 6-way ball valve with male thread, PN16
7Pages

Catalog excerpts

B2KL: 6-way ball valve with male thread, PN16 - 1

B2KL: 6-way ball valve with male thread, PN16 How energy efficiency is improved Efficiency means precise control and low actuating forces • 6-way ball valve for changeover or steady control of heating and cooling circuits in a 4-pipe system • With male thread as per ISO 228 • Kvs selection with exchangeable orifice plates • In combination with valve actuators AKM 115(S)andAKF 112, 113(S) as a control unit • Strainer and screw fitting available as accessories Technical data Valve characteristic Quasi-linear Total angle of rotation 90° Ambient conditions Pressure and temperature data EN 764, EN 1333 Flow parameters EN 60534, page 3 CE conformity PED 97/23/EC, cat. IV Fluid group II Type Nominal diameter Connection KVs value Weight -f- Kvs value without orifice plate. Kvs values can be adapted using orifice plates. Orifice plates for setting the Kvs value WSAUTER Right of amendment reserved © 2016 Fr. Sauter AG

Open the catalog to page 1

B2KL: 6-way ball valve with male thread, PN16 - 2

Product data sheet Accessories Type 2 flat-sealing screw fittings G1"-G½" 2 flat-sealing screw fittings G1"-G¾" 2 flat-sealing screw fittings G1"-G1" Pliers for changing orifice plate Fitting bracket Strainer in gun metal, –10…150 °C, mesh aperture 0.5 mm, DN 15 Strainer in gun metal, –10…150 °C, mesh aperture 0.8 mm, DN 20 Strainer in gun metal, –10…150 °C, mesh aperture 0.8 mm, DN 25 / Warranty: The technical data and pressure differences indicated here are applicable only in com/ / Actuator bination with SAUTER valve actuators. The warranty does not apply if used with valve actuators...

Open the catalog to page 2

B2KL: 6-way ball valve with male thread, PN16 - 3

Product data sheet Changeover B2KL015F400 Network 1 open Changeover B2KL020F400 Network 1 open Material numbers as per DIN DIN material no. Ball, polished, chrome-plated Additional technical data SAUTER slide rule for valve sizing Technical manual on control units Parameters, fitting notes, control, general information Applicable EN, DIN, AD, TRD and accident prevention regulations Fitting instructions Declaration on materials and the environment Right of amendment reserved © 2016 Fr. S

Open the catalog to page 3

B2KL: 6-way ball valve with male thread, PN16 - 4

Product data sheet Fitting position ►Do not install the 6-way ball valve in a suspended position, because condensate, dripping water etc. may penetrate and damage the actuator! Using with water When using water mixed with glycol or an inhibitor, the compatibility of the materials and seals used in the 6-way ball valve should be clarified with the manufacturer. The material list shown below may be used here. When using glycol we recommend a concentration of 20% to 50%. Right of amendment reserved © 2016 Fr. Sauter AG

Open the catalog to page 4