E-Mail [email protected] FPS 500M ^Dualmaster Heidenhain Positip 8016 touch active - straight cut control Comfortable to operate active - straight cut control with 12” touch screen for position value display, dialogs, inputs and graphic functions. - - Recurring work sequences can be grouped into programs. - Programming of rectangular pockets with one cycle - Distance-to-go operation with input of the nominal position in absolute or incremental dimension - Probing functions for reference point determination (edge, centerline and circle center) also optionally possible with touch probe. - Definition of program parameters (speed, feed rate, etc.) The spindles, vertical and horizontal, are equipped with a hydromechanic tool clamping system.

E-Mail [email protected] Slidable milling head The vertical milling head can be additionally moved 150 mm in the longitudinal axis for maximum working range, thus increasing the X - Y working area to 500 x To make the adjustment of the milling head arm in the longitudinal axis as comfortable as possible, an additional removable handwheel has been installed. The milling head can be swilled +/- 90° and can be positioned in any number of degrees via a scale. Optionally, a digital angle encoder can be used to align the vertical milling head with an accuracy of Version 002 - Status: April 2026...

E-Mail [email protected] Locking at the milling head After the horizontal working or swiveling of the milling head it can be quickly brought back again in the vertical position via a locking and can therefore be immediately repositioned. The vertical spindle is manually telescopic by 80 mm and can be used as a drilling quill. The telescopic quill has a clamping feature. For horizontal working the milling head must be swiveled by 90° and pushed backwards. For horizontal machining, the vertical milling head does NOT have to be dismantled, it is pushed into the rest position. This makes changing...

E-Mail [email protected] Telescopic horizontal quill (Option) The horizontal spindle is manually telescopic by 100 mm and can be used as a drilling quill. The telescopic quill has a clamping feature. Mechanical manual safety handwheels with additional scale ring in all axes with sensitive response. The handwheels are arranged ergonomically and user-friendly for maximum ease of operation. In addition to the digital display, a scale on the handwheel allows easy positioning. Version 002 - Status: April 2026 | Subject to technical changes and errors.

E-Mail [email protected] Fixed table The fixed table is included in the basic equipment of the machine. It has a clamping surface of 630 x 470 mm and the max. load is 350 kg. The fixed table has seven 14H7 slots, with a distance of 63 mm. Lubrication of all guides and spindles due to a time interval. Coolant in spindle base Articulated hoses can be used to ensure that the tool is supplied with coolant in any position. Version 002 - Status: April 2026 | Subject to technical changes and errors.

E-Mail [email protected] Coolant tank External, movable coolant tank with a capacity of The coolant pump is integrated in the coolant tank. Main drive by a high-torque direct drive. Speed range: Internal, infinitely variable, digital feed in all axes. Feed range: Rapid traverse: Version 002 - Status: April 2026 | Subject to technical changes and errors.

E-Mail [email protected] Mobile swarf tray (Option) Generously sized swarf tray under the swivel table. Optional swarf tray only in conjunction with swivel table. Standard swarf tray not required. Turn/tilt/tilting table for universal processing of parts. - Can be tilted from / to the machine, 30° each - Can be swiveled to the left & right, 45° each - T-slots: 8x 14mm / alignment slot 14H7 Electronically fused splash guard for manual operation. Spindle operation is only possible in the working position of the cutter guard.1

E-Mail [email protected] Three-sided splash guard(option) Three-sided splash and chip guard for mounting on the moving chip tray. Each component is individually and independently foldable. Version 002 - Status: April 2026 | Subject to technical changes and errors.

E-Mail [email protected] Full protection cabin (option) Full protection cabin to avoid emissions with optimal, user-friendly 2 side access. Glazed on all sides, front with tempered glass Extendable splash guard (Option) Additional, laterally extendable splash guard in the lower cabin area, under the fixed table. Protects the operator from coolant and swarf in the leg area, especially during manual operation. version uu<r - status: /\prn d.ud.o \ suoject to tecnmcai cnanges and errors.

E-Mail [email protected] Foot switch for tool clamping(Option) For convenient clamping of tools without additional pressing of a switch on the control panel. Minimum quantity lubrication UFS20 for coolant (oil mist lubrication) mounted on the spindle base. The nozzle can be removed from the machine. A compressed air supply to the machine is required (4-8 bar at 20 Nm3). External blowing air on spindle base with removable nozzle. Incl. articulated hose and pneumatic maintenance unit. A compressed air supply to the machine is required (4-8 bar at 20 Nm3). Version 002 - Status: April 2026 | Subject...

E-Mail [email protected] Pneumatic maintenance unit Pneumatic maintenance unit for preparing the external compressed air. Overarm with counterbearing for horizontal working. For facilitating the removal of swarf from the work area. Swarf conveyor suitable for wet and dry machining. Version 002 - Status: April 2026 | Subject to technical changes and errors.

E-Mail [email protected] Camera (Option) Camera for workspace monitoring. The camera is protected against penetration of liquids and dust. Video output via HDMI. Space Requirement Width 2600 ’Data without safety distances Version 002 - Status: April 2026 | Subject to technical changes and errors.