Data sheet FP3 2302 – 100 active digital Inclined bed machine X = 800mm with stepless adjustable feed X / Y / Z Item number : 3060 Display Application 3-axis FPS active digital display – new machine control panel Easy to operate digital display / straight cut control with absolute and chain dimension input incl. tool correction. The control contains four programmable reference points. The positioning of the machine is simplified by direction indication by LEDs. Technical Data Axis travel Tool holder Clamping system Work spindle Milling arm Speed range Feed Rapid traverse Fixed table SK40 DIN 69871 DECKEL S20 x 2 (standard) M 16 (optional) Vertical and horizontal. Telescopic vertically and horizontally 100 mm. Milling head manually tiltable +/- 90 ° Additionally adjustable in Y-axis by 200mm. This increases the X - Y working area to 800 x 500 mm. 25 – 2500 rpm geometrically stepped direct gear transmission with 18 speed stages for maximum torque / milling performance 5 to 500 mm/min – stepless adjaustable 1,2 m/min – stepless adjaustable 1400 x 550 mm max. load

Data sheet Switch cabinet electronics Safety / brake motor According to new machine EN / ISO Standards Modernised to the legally required safety standard "state-of-the-art" in accordance with the safety ordinance of the trade association. Installation of a new CE switch cabinet according to the current legal regulations of the trade associations. BGVA 3 / DIN-EN 60204-1 new machine standard. Conversion of the machine by mounting a new brake motor. When the speed stops, the milling spindle comes to an immediate standstill. Central lubrication Chip pan Universal table Index head Machine lamp Protective...