Mill Collection
11Pages

Mill Collection CT 293 CyclotecTM, CM 290 CemotecTM, KN 295 KnifetecTM, HammertecTM, HM 294 Homogeniser and HM 297 Homogeniser Labtec™ Line The Mill Collection covers a broad range of sample preparation applications for both traditional wet chemistry and instrumental analysis. The range includes; the CM 290 CemotecTM for grinding solid samples without moisture loss; the CT 293 CyclotecTM for uniform grinding of dry samples and the KN 295 KnifetecTM for the prepa­ ation of highr fat, high-moisture and fibrous samples, the HammertecTM which is specially designed for falling number analysis and the HM 294 Homogeniser and HM 297 Homogeniser for rapid homogeniza­ ion of larger samples with a high fat or t oil content. Sample • Raw materials and finished products in Food, Feed and Agriculture • Also used in a wide range of industrial applications Dedicated Analytical Solu

Sample preparation for good results Good results start with sample preparation. Errors caused by analytical instruments are very small compared to the errors associated with sample preparation. Badly prepared samples will automatically result in large analytical errors. The laboratory sample mill is an important but often overlooked link in the chain of analysis; so important that FOSS regards it as an integral part of the analytical system. A broad range of applications To assure the best analytical results FOSS has developed a range of specially designed mills that are both safe and...

CM 290 Cemotec™ Sample grinding without moisture loss The CM 290 Cemotec™ is specially designed to grind grain and seed samples without losing moisture content. It is an excellent mill for all types of sample preparation where the requirements for fineness and uniformity of particle size are moderate. CM 290 Cemotec - Size distribution - The CM 290 Cemotec™ works on the principle of shearing between two discs, one stationary and one turning. The sample is introduced at the centre of the stationary disc and is crushed between the discs. The distance between the discs is easily adjusted by a...

CT 293 CyclotecTM with standard sample inlet and 350 ml glass bottle CT 293 Cyclotec™ Rapid sample preparation for general laboratory analysis grinding surface and then passes it through a fine mesh screen. The high volume air flow provides self cleaning action, enabling whole series of samples to be ground with minimal cross contamination. The CT 293 CyclotecTM offers a very rapid and convenient sample preparation in a variety of analytical techniques such as infrared spectroscopy, Kjeldahl, fibre determination and solvent extraction. It is an excellent mill for all types of sample...

KN 295 Knifetec™ Rapid sample preparation of high-fat, high-moisture and fibrous samples The KN 295 Knifetec™ is designed for the preparation of high fat, high moisture and fibrous samples prior to analysis, such as oilseeds, prepared foods, meat products, fruit, vegetables, grains, seeds and feed. Description: The high speed rotor blade and timer control ensure very fast and reproducible sample preparation time after time. The normal time to prepare samples is from two to ten seconds. A safety switch located in the lid prevents accidental operation of the mill with the lid removed. The KN...

Hammertec™ Exchangeable rotor belt Exchanging the rotor belt on your mill has never been easier. Designed with easy access to the belt, makes it possible even for non-experts to replace hassle free. Hammer mill for falling number analysis The Hammertec™ is specially designed for falling number analysis, wet chemistry and NIR analysis. It is an excellent mill for all types of sample preparation where the requirements for fineness and uniformity of particle size are high. Suitable for dry, flowable whole cereal grain samples Description: Built with a focus on the user, the Hammertec makes...

HM 294 Homogeniser and HM 297 Homogeniser Rapid maceration and homogenization of a variety of samples. The HM 294 and HM 297 Homogenisers are designed for macerating and homogenising of a variety of high moisture, high-fat and fibrous samples. Application examples include: • Size reduction of forage, dry food and chemical products • Homogenisation of meat, fish, fruit, vegetables, prepared foods (such as pizza,meat pies and frozen meals) and chemical and pharmaceutical formulations. • The Homogenisers allow frozen food samples to be homogenised in a short period of time, providing more...

Extended warranty on new instruments with a FossCare agreement Secure your investment with a FossCare™ Support Agreement Let FOSS take care of you for a maximum return on your analytical investment. Get a four year warranty as part of the new FossCare Premium Preventive Maintenance Agreement or two years as part of any other FossCare agreement. In addition to the peace of mind afforded by the warranty period, the continual preventive maintenance pays off by keeping your analytical instruments working perfectly every day, year after year. Why preventive maintenance? As with any analytical...

CM 290 Cemotec™ • CM 290 Cemotec™ complete with hardened Grinding Discs, Funnel, Funnel lid, Glass sample bottle 350 ml 4pcs/pkg, Wirebrush, Brush, User Manual and Quick guide, 200-230 V, 50-60 Hz • Same as above but for 115 V, 50-60 Hz Accessories • Glass sample bottles 350 ml 4 pcs/pkg and 40 pcs/pkg • Wirebrush • Brush • Funnel with lid • Grinding Discs (1 pair) CT 293 Cyclotec™ • CT 293 Cyclotec™ complete with Glass sample bottle 350 ml 4pcs/ pkg, Screen 0.5 and 1.0mm, Brush, Dust pad 5 pcs, Tube brush, Silicone Plug, Hexagon and Allen wrench, Grinding ring standard, Belt Tension Adjust...

Rotor speed, grinding disc: 3.000 rpm Power supply: Power consumption: Net weight: Dimensions, L x D x H: Hammertec™ Power supply: Power consumption: Weight: Dimension: (wxdxh) Noise: Temperature: 200-240 VAC 50/60 Hz 100-120 VAC 50/60 Hz 1300 W 40.6 kg 240 x 555 x 460 mm Less than 80 dB In door use, 5-40 °C Power supply: Power consumption: Net weight: Dimensions, L x D x H: Rotor speed, impeller: Power supply: Power consumption: Net weight: Capacity: Rotor speed: Dimensions, L x D x H 230 V, 50 Hz 1-phase 115 V, 60 Hz 1-phase 500 W 15 kg 3.5 l bowl. 1,5 l liquid content 1.500 rpm 250 x 410...