DATA SHEET FORTEST T9730 CONTINUOUS MEASUREMENT HIGH PERFORMANCE FLOW TESTER Flow measurement with solid-state sensor. T9730 was designed for the precise task of measuring flows on parts such as filters (medicinal, diesel or petrol), tubes, nozzles, openings and valves. Other than the classic flow measurement, the instrument also has other ways of making it as versatile as possible in its category: ascent and descent ramps, opening tests and burst testing. Another separate function is the “continuous measurement", i.e. a test with infinite times allowing adjustment of the taps and part repairs in real time. The equipment also avails of an intelligent pressure adjustment, which uses the automatic pressure regulator to continuously adjust the test pressure based on the variation in load loss, to ensure the reading is as stable and repetitive as possible. Q ^ 10* Solid-state Multiple operating Intelligent pressure sensor modes adjustment Limitless connectivity. T9730 includes ports for the USB slave, RS232, RS485, Can bus and TTY. The instrument may also include an optional Ethernet port and a 26-pole connector with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc... The front panel has a master USB port for connection to a USB key to save the tests, backup/restore parameters and upgrade firmware. The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu. Top category technology. We decided not to make compromises when equipping the T9730, assembling the best components currently on the market, such as the piezoelectric electronic regulator which guarantees stable and repetitive adjustment, or the solid-state sensor with a vast reading range, or the specific valves for this model, with a life estimated in tens of millions of cycles. All these advantages give never before seen precision performance, stability and accuracy. Measurement resolution starts with 0.1 cc/min based at the bottom of the scale, varying from 1,000 to 20,000 cc/min. Automatic Measurement up Resolution starting pressure regulator to 20,000 cc/min from 0.1 cc/min Made to measure pneumatic section. To avoid overheating due to long activation times of the filling circuit, we have designed particular, high capacity pneumatic valves, which not only work in hot temperatures, but also quickly fill the piece being tested, making the T9730 also suitable for testing on parts with significant volumes. All of the above, while maintaining ForTest's historic reliability. Heat-proof High filling speed No periodic pneumatic valves maintenance Innovative design. What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the equipment as simple as possible. The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T9730 suitable for use in the laboratory and on the production line. The extensive internal menus are easy to understand and the graphic interface was designed to only display important information. Everything is exactly where it should be. ForTest group - www.fortest.com - [email protected]

FORTEST T9730 CONTINUOUS MEASUREMENT HIGH PERFORMANCE FLOW TESTER Application Sectors Measurement Caracteristics • Unit measure available: mbar, bar, psi, mmHg, mmH20, Pa, HPa, cc/min, cc/min, cc/h pressure/s • Frontal connector for Staubli calibrated leak Technical Specifications • Dimensions 300x160x350 mm • Weight 10 Kg • Electrical Supply 24VDC, 110 VAC, 230 VAC • Air tube size: 4x2.7, 6x4, 8x6, 10x8 Test Modes • Leak Flow test • Ramp + Communication Interfaces Interface Name Accessories • Barcode reader • Label printer • Leak Test Manager PC software • Air filter • External Start/Stop push...