T8730 Flow Tester with EtherNet/IP Device Level Ring support
3Pages

DATA SHEET T8730 FLOW TESTER FOR EXHAUST SYSTEMS WITH ETHERNET/IP DLR Flow measurement with solid-state sensor. nozzles, openings and valves. also has other ways of making it as versatile as possible in its category: ascent and descent ramps, opening tests and burst testing. Another separate function is the “continuous measurement”, and part repairs in real time. The equipment also avails of an intelligent pressure adjustment, which uses the automatic pressure regulator to continuously adjust the test pressure based on the variation in load loss, to ensure the reading is as stable and repetitive as possible. this model, with a life estimated in tens of millions of cycles. All these advantages give never before seen precision performance, stability and accuracy. Measurement resolution starts with 0.1 cc/min based at the bottom of the scale, varying from 1,000 to 20,000 cc/min, with maximum pressure of 2 bar. Automatic pressure regulator Resolution starting from 0.1 cc/min Made to measure pneumatic section. To avoid overheating due to long activation times capacity pneumatic valves, which not only work in hot Solid-state sensor Multiple operating modes Intelligent pressure adjustment making the T8730 also suitable for testing on parts with All of the above, while maintaining ForTest’s historic reliability. Limitless connectivity. T8730 includes ports for the USB slave, RS232, RS485,Ethernet/IP, Profinet and EtherCat. Assembly may also include an optional port with 4 inputs and 8 outputs, which are completely programmable, for interfacing with the external valves, safety barriers, switches, etc... The front panel has a master USB port for connection to a USB key to save the tests conducted, backup/restore The connection to thermal printers, barcode/data-matrix readers and markers takes place automatically using an internal menu. High power outputs Ethernet and auxiliary connector Top category technology. We decided not to make compromises when equipping the T8730, assembling the best components currently on the market, such as the piezoelectric electronic regulator which guarantees stable and repetitive adjustment, or the solid-state ForTest Group Heat-proof pneumatic valves Innovative design. What appears to be a simple design exercise, in fact hides an in-depth study to make use and understanding of the equipment as simple as possible. The front panel is made of a single sheet of tempered glass and aluminium, which makes it extremely easy to clean, making the T8730 suitable for use in the laboratory and on the production line. The extensive internal menus are easy to understand and the graphic interface was designed to only display important information. Everything is exactly where it should be. User-friendly interface - www.fortest.com - info@fortest.com

DATA SHEET T8730 FLOW TESTER FOR EXHAUST SYSTEMS WITH ETHERNET/IP DLR Application Sectors Alternative Energy Mechanical Medical Dimensions 270 x 160 x 300 mm Weight 8 Kg Electrical Supply 24VDC, 110 VAC, 230 VAC Air tube size: 4x2.7, 6x4, 8x6, 10x8 Household Appliances Unit measure available: mbar, bar, psi, mmHg, mmH20, Pa, HPa, cc/min, cc/min, cc/h pressure/s Frontal connector for Staubli calibrated leak Measurement Caracteristics Type Range from -1 to 3 bar Accuracy ∆p(Leak) Resolution Direct Pressure 1% RDG+0,1% FS to 1% RDG+0,5% FS From 0.01 cc/min to 500 cc/min 0.5% FS Test Modes • •...

Active Ring Supervisor Blocked Port Beacon Frame Control Traffic Ring Node 3 Ring Node 2 EtherNet/IP Interface features - Device Level Ring Support - CIP™ Standard from ODVA - EDS File Configuration - 32 bytes Output Assembly O->T - 288 bytes Input Assembly T->O - Configuration web service - Firmware Update from web service - Communication diagnostic - Device state and communication error management - File Transfer Protocol - DCP Support