Catalogs >
FORND >
A-1531

A-1531
1 / 1Pages

Catalog excerpts

lift ＆ turn compression latch A-1531 lift ＆ turn compression latch IP40 长锁舌Long locking tongue 直立锁舌Vertical locking tongue 反向偏置Reverse biased 深度反向偏置锁舌 Deep reverse offset locking tab 附注 annotations：间距范围在 33.5 及以下的，它们是门板厚度的相关函数，但锁的最小间距值并不一定是取间距范围的最小值，而是取决于实际的门板厚度。在这个间距范围内，可实现的最小间距限制为实际门板厚度 + 间距调节值，或表格内的最小值；两者中取最大值。 The spacing range of 33.5 and below is a correlation function of the door panel thickness, but the minimum spacing value of the lock does not necessarily take the minimum value of the spacing range, but depends on the actual door panel thickness. Within this spacing range, the minimum achievable spacing limit is the actual door panel thickness+spacing adjustment value, or the minimum value in the table; Take the maximum value between the two. 深度偏置前屈 Deep bias forward bend 偏置前屈 Bias forward bend 直立 upright 反向偏置 Reverse bias 深度反向偏置 Deep reverse bias 不带钥匙锁 Non-locking For 3D model drawings, please contact WWW.FORND.COM 2. Performance parameters: Protection class: IP40 Handle bearing tension value: ≤ 420N Maximum static load: 400N 3.R

Open the catalog to page 1

A-1531 1 / 1Pages

Catalog excerpts

All FORND catalogs and technical brochures

A-1531
1 / 1Pages