DENTAL SG Biocompatible Photopolymer Resin for Form 2

Product catalog summary

Material Overview: Dental SG is a biocompatible photopolymer resin designed for use with the Form 2 3D Printer. It is ideal for creating dental surgical guides and similar applications. The resin can be post-cured and sterilized using steam or gamma-ray methods.

Material Properties:

Flexural Properties: Flexural Strength is ≥ 50 MPa and Flexural Modulus is ≥ 1500 MPa, as per ISO 20795-1:2013.
Hardness: Shore D hardness is ≥ 80D, according to ISO 868:2003.
Impact Properties: Charpy Impact Strength (Unnotched) is between 12 – 14 kg/m², based on ISO 179:2010.

Biocompatibility: Certified by NAMSA in France, Dental SG is biocompatible per EN-ISO 10993-1:2009/AC:2010. It is non-mutagenic, non-cytotoxic, does not induce erythema or edema, is not a sensitizer, and does not cause systemic toxicity.

Compliance with Standards:

EN-ISO 20795-1:2013: Dentistry – Base Polymers – Part 1: Denture Base Polymers.
EN-ISO 7405:2009/A1:2013: Evaluation of biocompatibility of medical devices used in dentistry.
EN-ISO 10993-1:2009/AC:2010: Biological evaluation of medical devices – Part 1 – Evaluation and testing.

Notes: Material properties may vary based on part geometry, print orientation, settings, and temperature. Post-cured properties are obtained after exposing parts to specific UV light conditions in a heated environment.

Catalog excerpts

DENTAL SG Biocompatible Photopolymer Resin for Form 2-1

Biocompatible Photopolymer Resin for Form 2 MATERIAL PROPERTIES Prepared: 04/15/2016 To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied regarding the accuracy of these results to be obtained from the use thereof.

Open the catalog to page 1

DENTAL SG Biocompatible Photopolymer Resin for Form 2-2

Formlabs Dental SG Resin produces strong, accurate, biocompatible parts ideal for a dental surgical guide and similar applications, and is specifically designed to work with your Form 2 3D Printer. After being post-cured, this material can be steam sterilized in an autoclave, or by gamma-ray sterilization. For more detailed information on handling and use, please see the Instructions for Use and the Safety Data Sheet. METRIC METHOD Dental SG is tested at NAMSA, Chasse sur Rhone in France, and is certified biocompatible per EN-ISO 10993-1:2009/AC:2010: • Non-mutagenic. • Non-cytotoxic. • Not...

Open the catalog to page 2