Dental LT Clear 2017

Product catalog summary

Material Overview: Dental LT Clear is a biocompatible photopolymer resin designed for use with the Form 2 3D printer. It is suitable for creating dental splints, retainers, and similar applications. The resin is strong, accurate, and can be disinfected with ethanol post-curing. However, it should not be autoclaved as this affects its mechanical properties.

Material Properties:

Flexural Properties: Ultimate Flexural Strength is ≥ 50 MPa with no break, and Flexural Modulus is ≥ 1300 MPa, both tested according to ISO 20795-2:2013.
Hardness: The material has a Shore D hardness of 80 – 90D, as per ISO 868:2003.
Impact Properties: Maximum stress intensity factor is ≥ 1.1 MPa•m^1/2 (ISO 179:2010), and total fracture work is ≥ 250 J/m² (ISO 20795-2:2013).

Biocompatibility and Compliance: The resin is tested and certified biocompatible according to EN-ISO 10993-1:2009/AC:2010. It complies with several ISO standards, including EN ISO 1641:2009, EN-ISO 10993-3:2009, EN-ISO 10993-5:2009, and EN 908:2008.

Catalog excerpts

Dental LT Clear Biocompatible Photopolymer Resin for Form 2 MATERIAL PROPERTIES Prepared: 10/04/2017 To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied regarding the accuracy of these results to be obtained from the use thereof.

Open the catalog to page 1

Formlabs Dental LT Clear Resin produces strong, accurate, biocompatible parts ideal for dental splints, retainers, and similar applications, and is specifically designed to work with your Form 2 3D printer. After being post-cured, this material can be disinfected in an ethanol solution. Do not place in an autoclave for sterilization as this will negatively affect mechanical properties. For more detailed information on handling and use, please see the Instructions for Use and the Safety Data Sheet. METRIC METHOD Dental LT Clear is tested at NAMSA, Chasse sur Rhone in France, and is certified...

Open the catalog to page 2

All Formlabs catalogs and technical brochures