Castable

Castable

Castable

Product catalog summary
Chemical Product and Company Identification
The product is a photoreactive resin designed for Formlabs printers Form 1 and Form 1+. It consists of methacrylated oligomers, monomer, and photoinitiator, prepared by Formlabs, Inc. on September 25, 2014.
Hazards Identification
The resin is classified as causing skin, eye, and respiratory irritation. Hazard statements include H315, H317, H320, and H335. Precautionary measures recommend avoiding inhalation and contact, and using protective gear.
Composition/Information on Ingredients
The product contains proprietary methacrylated oligomers, methacrylated monomer, and photoinitiators. No specific exposure limits are established.
First-Aid Measures
For inhalation, move the person to fresh air. In case of eye contact, rinse with water for 20 minutes. For skin contact, wash with soap and water. If ingested, do not induce vomiting and seek medical attention.
Fire-Fighting Measures
The flash point is greater than 93°C. Use carbon dioxide or dry chemical for small fires. Firefighters should wear protective clothing and SCBA.
Accidental Release Measures
Contain spills, avoid environmental release, and use non-sparking tools for cleanup. Dispose of according to regulations.
Handling and Storage
Store in a cool, dry place away from sunlight and avoid temperatures above 60°C. Use in well-ventilated areas and avoid skin contact.
Exposure Controls & Personal Protection
Ensure adequate ventilation. Use protective gloves, goggles, and clothing. Respirators are generally not needed unless handling at elevated temperatures.
Physical & Chemical Properties
The resin is a blue liquid with a slightly acrylic odor. It has a boiling point greater than 100°C, a flash point greater than 100°C, and a viscosity of 250-325 cps at 25°C.
Stability and Reactivity
The product is stable under recommended storage conditions. Avoid exposure to light and high temperatures. It is incompatible with strong oxidizers and bases.
Toxicological Information
The components are not reported to be mutagenic or carcinogenic. The methacrylated monomer has an oral LD50 greater than 3000 mg/kg.
Ecological Information
The product is not readily biodegradable and should not be released into the environment.
Disposal Considerations
Dispose of in accordance with regulations. Do not allow entry into drainage systems.
Transport Information
The product is not regulated by D.O.T., IMDG, or IATA.
Regulatory Information
The product complies with TSCA and other regulations and is not subject to SARA 302 or California Proposition 65.
Other Information
HMIS ratings are Health 2, Fire 1, Reactivity 1, with personal protective equipment rated as D.
See more

Catalog excerpts

Castable-1

Castable Photoreactive Resin for Form 1, Form 1+ MATERIAL SAFETY DATA SHEET Prepared: 09/25/2014 GHS-Labelling Hazard pictograms: Signal word: Warning

 Open the catalog to page 1
Castable-2

1. Chemical Product and Company Identification Product Identification: Photoreactive Resin Product Class: Mixture of methacrylated oligomers, methacrylated monomer, and photoinitiator Product Use: For use in Formlabs printer Form 1, Form 1+ Company: Formlabs, Inc. 35 Medford Street, Suite #1 Somerville, MA Date of Preparation: 09/25/2014 For Emergencies: Call +1 617 932 5227 2. Hazards Identification EMERGENCY OVERVIEW COLOR: BLUE PHYSICAL STATE: LIQUID ODOR: SLIGHTLY ACRYLIC / CHARACTERISTIC * lassification of the substance or mixture: C Skin irritation, Category 3 Eye irritation, Category 2B...

 Open the catalog to page 2
Castable-3

Remove contact lenses, if present and easy to do. Continue rinsing. P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P333 + P313: If skin irritation or rash occurs: Get medical advice/attention. P362: Take off contaminated clothing and wash before reuse. P391: Collect spillage. SUPPLEMENTAL HEALTH INFORMATION Potential Health Effects: Effects due to processing releases: Irritating to eyes, respiratory system and skin. Prolonged or repeated exposure may cause: headache, drowsiness, nausea and/ or weakness (severity of effects depends on extent of exposure). Other: This...

 Open the catalog to page 3
Castable-4

Upper Explosion Limit: no data Extinguishing Media: Use carbon dioxide or dry chemical for small fires; aqueous foam or water spray for large fires. Special Firefighting Procedures: Firefighters should wear full protective clothing and self-contained breathing apparatus (SCBA). Thoroughly decontaminate firefighting equipment including all firefighting apparel after the incident. Unusual Fire & Explosion: Emits irritating vapors. High temperatures, accidental impurities, or exposure to radiation or oxidizers may cause spontaneous polymerization generating heat/pressure and rupture/explosion of...

 Open the catalog to page 4
Castable-5

NOTATIONS IOELVs — Indicative Occupational Exposure Limit Values TWA — Time Weighted Average OEL — Occupational Exposure Limits PEL — Permissible Exposure Limit TLV — Threshold Limit Value STEL — Short Term Exposure Limit WEEL — Workplace Environmental Exposure Level by the American Industrial Hygiene Association EXPOSURE CONTROLS Ventilation Controls: Ensure adequate ventilation. Respiratory Protection: Respirators are generally not needed under normal conditions of use. If this material is handled at elevated temperature, under mist-forming conditions or in case of accidental release of large...

 Open the catalog to page 5
Castable-6

10. Stability and Reactivity Stability: Material is stable when stored, in its original container (designed for use with light sensitive materials) and under 35 °C (95 °F) in a dark, cool place. Conditions to Avoid: Storage temperatures > 100 °F Exposure to light Loss of dissolved air Contamination with incompatible materials Incompatible Materials to Avoid: Polymerization initiators, including peroxides, strong oxidizing agents, alcohols, copper, copper alloys, carbon steel, iron, rust, and strong bases. Hazardous Decomposition Products: Hazardous decomposition products may include oxides of...

 Open the catalog to page 6
Castable-7

14. Transport Information Department of Transportation Classification: Not hazardous by D.O.T. regulations. D.O.T. Proper Shipping Name: Not regulated International Maritime Dangerous Goods Code (IMDG): Not regulated International Air Transportation Association (IATA): Not regulated Other Requirements: N/A Australian HazChem Code: N/A 15. Regulatory Information The following provides a summary of the legal requirements. EUROPEAN ECONOMIC COMMUNITY (EEC) Ingredient European Community Standards CANADA REGS Listed as dangerous chemicals per ESIS All the components present in this product at concentrations...

 Open the catalog to page 7
Castable-8

SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. Pursuant to Title III of the Superfund Amendments and Reauthorization Act of 1986, (SARA) and 40 CFR 372 Part 372, this product does not contain chemicals subject to the reporting requirements under Section 313. California Proposition 65: This product does not contain chemicals which are known to the state of California to cause cancer. 16. Other Information HMIS (Hazardous Materials Information System) for secondary labeling: HEALTH FIRE HAZARD PERSONAL PROTECTIVE EQUIPMENT REFERENCES:...

 Open the catalog to page 8

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.