StoneFil™
1Pages

Technical Data SheetProduct name: StoneFil™ Version: v3 StoneFil is a PLA-based filament which is based on our modified and easy-to-print EasyFil PLA compound and is gravimetrically filled with 50% of powdered stone. This high “stone filling” has resulted in a 3D printer filament with remarkable aesthetic features and a significant higher material density up to 37% higher than “normal” PLA. StoneFil is an easy-to-print 3D printer filament and printed objects have an extremely matte stone-like finish with unique natural gradient colour linings resulting in an exceptional chromatic spectrum per print. Every StoneFil printed object will have its own identity and unique gradient colour shading. Typical value Test Method Test condition Melt flow rate 94 g/10min Mechanical Impact strength Tensile strength Tensile modulus Elongation at break Flexural strength Flexural modulus Hardness Viscat softening temp. ± 57° C ISO 306 VST/A/50 (50° C/h, 10N) Optical Haze - - - Transmittance - - - Gloss - - - Product details, certifications and compliance HSCode 39169090 REACH compliant Yes RoHS certified Yes Diameter Tolerance Roundness Formfutura BV Groenestraat 215 6531 HH Nijmegen The Netherlands Email: info@formfutura.com Website: www.formfutura.com All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the forementioned information or product. The user assumes allresponsibilityfor the use ofallinformation provided and shall verifyqualityand other properties or anyconsequence from theuse of all such information. Typical values are indicative only and are not to be construed as being binding specifications.