Pegasus PP

Pegasus PP

Product catalog summary
Product Overview: Pegasus PP is an ultralight filament enhanced with nanotechnology, making it 20% lighter than regular polypropylene (PP). It retains the mechanical properties of PP, making it suitable for applications in automotive, drones, floating devices, and wear-resistant products.
Specifications:
  • Specific Gravity: 0.75 g/cc (ISO 1183)
  • Melt Flow Rate: 6.2 g/10min at 230°C / 2.16kg (ISO 1133)
  • Tensile Strength: 12 MPa at yield, tested at 50mm/min (ISO 527)
  • Elongation at Break: 25% (ISO 527)
  • Impact Strength: 3.56 KJ/m² at 23°C (ISO 179)
  • Print Temperature: Approximately 215 - 245°C
  • Melting Temperature: Approximately 154°C
Certifications and Compliance:
  • REACH Compliant
  • RoHS Certified
Additional Information: The product is available in diameters of 1.75mm and 2.85mm with a diameter tolerance of ≥ 95%± 0.05mm for 1.75mm and ≥ 95%± 0.10mm for 2.85mm. The HS Code is 39169090.
Disclaimer: All information is provided by Formfutura and is believed to be reliable, but no warranties are made regarding its accuracy or applicability. Users are responsible for verifying the quality and suitability of the product for their specific applications.
See more

Catalog excerpts

Pegasus PP-1

Technical Data SheetProduct name: Pegasus PP Pegasus PP is most likely the lightest filament in the world! Pegasus PP is an ultralight nanotechnology enhanced compound based on our Centaur PP plus other PP grades and various impact modifiers and binding agents. Due to the nanotechnology applied Pegasus has a 20% lower weight and/or density than regular PP. Pegasus PP combines all the mechanical properties of PP with an extremely lightweight and by that makes it a very suitable material for applications such as automotive, drones, floating applications, wear resistant & durable applications, etc... Physical Specific gravity 0.75 g/cc Melt flow rate 230°C / 2,16kg Water absorption Moisture absorption Mechanical Impact strength Tensile strength Tensile modulus Elongation at break Flexural strength Flexural modulus Hardness Thermal Print temperature Melting termperature Viscat softening temp Optical Haze Transmittance Gloss Charpy Notched @23° C (73° F) @Yield 50mm/min (2 inch/min) All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties ofany kind, express orimplied, including, but not limited to, those oftitle, merchantability, fitnessfor a particularpurpose ornon-infringement orany warranty arisingfrom a course ofdealing, usage, ortrade practice whatsoever in respect ofapplication, processing or use made ofthe forementioned information orproduct. The user assumes all responsibilityfor the use ofall information provided and shall verify quality and other properties or any consequence from the use of all such information. Typical values are indicative only and are not to be construed as being binding specifications. Formfutura BV • Groenestraat 215 • 6531 HH • Nijmegen • Netherlands • T: +31 (0)85 002 0880 • E: [email protected] Dutch Business Registration No: 69099502 • VAT No: NL857733709B01 • EORI No: NL857733709 • D-U-N-S: 490546732 - www.formfutura.com -

 Open the catalog to page 1

All FormFutura catalogs and technical brochures

  1. HDglass™

    1  Page

  2. Centaur PP

    1  Page

  3. LimoSolve™

    1  Page

  4. StoneFil™

    1  Page

  5. STYX-12

    1  Page

  6. TitanX™

    1  Page

  7. Volcano PLA

    1  Page

  8. CarbonFil™

    1  Page

  9. ABSpro™

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.