MetalFil™ - Brass
1Pages

Technical Data Sheet Product name: MetalFil™ ‐ Brass MetalFil ‐ Brass is a metal‐filled PLA‐based filament with approximately 70% of gravimetric brass filling. This incredible high filling with brass powders enables every FDM 3D printer user to 3D print brass objects which are almost indistinguishable from genuine brass casted objects. MetalFil ‐ Brass is easy to print and can be printed on full metal, PEEK, and PFTE hotends and can perfectly be printed with ≥ 0.4mm nozzles with retraction settings enabled on both direct drive extruders, as well as on Bowden style extruders, which is a truly unique feature for a metal‐filled filament. MetalFil Brass printed objects are extremely easy to polish. Typical value Test Method Test condition Specific gravity Melt flow rate Water absorption Moisture absorption Impact strength Tensile strength Tensile modulus Flexural strength Flexural modulus Print temperature Melting termperature Viscat softening temp. Product details, certifications and compliance REACH compliant RoHS certified All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non‐infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the forementioned information or product. The user assumes all responsibility for the use of all information provided and shall verify quality and other properties or any consequence from the use of all such information. Typical values are indicative only and are not to be construed as being binding specifications.