Technical Data SheetProduct name: Helios Support Helios Support is a "high heat" water-soluble PVA material which is engineered as support material for dual extrusion 3D printing in combination with engineering materials which require to be printed at higher temperatures and/or in heated build chambers. Helios support can be printed at nozzle temperatures up to 250° C without the risk of cross linking and nozzle clogging and adheres extremely well to styrene based materials such as ABS, TitanX, Crystal Flex, and ApolloX, but also to Python Flex and Volcano PLA. Helios Support dissolves slightly slower in water than normal PVA, but the dissolving process can be sped up when using warm and circulating water. Properties Typical value Test Method Test condition Physical Specific gravity 1.19 g/cc Melt flow rate 58 g/10min Water absorption - Moisture absorption - Mechanical Impact strength - Tensile strength - Tensile modulus - Flexural strength - Flexural modulus - Thermal Print temperature ± 235 - 255° C Melting termperature - Viscat softening temp. - Optical Haze - Product details, certifications and compliance HS Code 39169090 Diameter Tolerance Roundness All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties ofany kind, express orimplied, including, but not limited to, those oftitle, merchantability, fitnessfor a particular purpose or non-infringement or any warranty arisingfrom a course of dealing, usage, or trade practice whatsoever in respect ofapplication, processing or use made ofthe forementioned information or product. The user assumes all responsibility for the use ofall information provided and shall verify quality and other properties or any consequence from the use of all such information. Typical values are indicative only and are not to be construed as being binding specifications. Formfutura BV • Groenestraat 215 • 6531 HH • Nijmegen • Netherlands • T: +31 (0)85 002 0881 • E: [email protected] Dutch Business Registration No: 69099502 • VAT No: NL857733709B01 • EORI No: NL857733709 • D-U-N-S: 490546732 - www.formfutura.com -