Technical Data SheetProduct name: HDglass™ Version: v3 HDglass is a high performance filament based on an unique PETG blend resulting in an amorphous, high strength, high gloss and ultra-transparent 3D printer filament. HD stands for “Heavy Duty”, as HDglass is developed to have an optimal thermal stability and by that perfect 3D printing flowing behaviour, resulting in a very easy to print 3D printer filament with a remarkable high gloss, transparency and excellent properties with respect to strength, toughness and temperature resistance. Typical value Test Method Test condition Physical Specific gravity 1.27 g/cc ASTM D792 Melt flow rate - - Water absorption - - Moisture absorption 0.13% ASTM D570 ASTM D256 ASTM D638 ISO 527 ASTM D638 ASTM D790 ASTM D790 ASTM D785 Izod Notched @23° C (73° F) @Yield 50mm/min (2 inch/min) 1mm/min 50mm/min (2 inch/min) 1.27mm/min (0.05 inch/min) 1.27mm/min (0.05 inch/min) Rockwell R-scale Mechanical Impact strength Tensile strength Tensile modulus Elongation at break Flexural strength Flexural modulus Hardness Thermal Print temperature ± 195 - 225° C - - Melting termperature - - - Viscat softening temp. ± 70° C ASTM D648 @ 0.455 Mpa (66psi) Diameter Tolerance Roundness Product details, certifications and compliance HSCode 39169090 Formfutura BV Groenestraat 215 6531 HH Nijmegen The Netherlands Email: [email protected] Website: www.formfutura.com All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the forementioned information or product. The user assumes allresponsibilityfor the use ofallinformation provided and shall verifyqualityand other properties or anyconsequence from theuse of all such information. Typical values are indicative only and are not to be construed as being binding specifications.