Product name: CarbonFil™ Version: v3 Our CarbonFil filament is based upon the unique PETG blend of our HDglass compound and is reinforced with 20% ultralight and relatively long stringer carbon fibres, which has resulted in an exceptionally stiff carbon-fibre reinforced 3D printer filament. CarbonFil is twice as stiff as HDglass and yet it is even 10% more impact resistant, which is a remarkable feature for carbon-fibre reinforced filament. Typical value Test Method Test condition Melt flow rate - - Water absorption - - Moisture absorption ± 0.13% - Mechanical Impact strength Tensile strength Tensile modulus Elongation at break Flexural strength Flexural modulus Hardness Thermal Print temperature ± 230 - 265° C - - Melting termperature - - - Viscat softening temp. ± 85° C ASTM D648 @ 0.455 Mpa (66psi) Optical Haze - - - Transmittance - - - Gloss - - - Izod Notched @23° C (73° F) @Yield 50mm/min (2 inch/min) 1mm/min @ Break 50mm/min (2 inch/min) Rockwell R-scale Product details, certifications and compliance HSCode 39169090 REACH compliant Yes RoHS certified Yes Diameter Tolerance Roundness Formfutura BV Groenestraat 215 6531 HH Nijmegen The Netherlands Email: [email protected] Website: www.formfutura.com All information supplied by or on behalf of Formfutura in relation to its products, whether in the nature of data, recommendations or otherwise, is supported by research and, in good faith, believed reliable, but Formfutura assumes no liability and makes no warranties of any kind, express or implied, including, but not limited to, those of title, merchantability, fitness for a particular purpose or non-infringement or any warranty arising from a course of dealing, usage, or trade practice whatsoever in respect of application, processing or use made of the forementioned information or product. The user assumes allresponsibilityfor the use ofallinformation provided and shall verifyqualityand other properties or anyconsequence from theuse of all such information. Typical values are indicative only and are not to be construed as being binding specifications.