Catalog excerpts
SOLVENT RECOVERY SYSTEMS Professional Formeco s.r.l. Via Cellini, 33 35027 Noventa Padovana Padova – Italy – www.formeco.com
Open the catalog to page 1SERIES STANDARD “DISTATIC” Model Explosion proof version ATEX approved For recycling of flammable and not flammable solvents Loading capacity: 60 litres Total volume of the boiler: 103 litres Inner diameter of the boiler: 400 mm Processing time: hours 4,00 - 5,30 Working temperature: 50 - 180 °C Operating: atmospheric pressure Voltage: 230 V - 50 Hz Electrical supply: single phase + earth Connected power: 3000 W Electrical protection: II2G IIA T3 to T2 Vapour condenser: stainless steel – cooled by air (on request - version “Wx” - cooled by water in open circuit) Dimensions: cm 110 x 75 x...
Open the catalog to page 2SERIES STANDARD “DISTATIC” Model Explosion proof version ATEX approved For recycling of flammable and not flammable solvents Loading capacity: 120 litres Total volume of the boiler: 210 litres Inner diameter of the boiler: 500 mm Processing time: hours 4,00 - 5,30 Working temperature: 50 - 180 °C Operating: atmospheric pressure Voltage: 4000 V - 50 Hz Electrical supply: three phases + earth Connected power: 7000 W Electrical protection: II2G IIA T3 to T2 Vapour condenser: stainless steel – cooled by air (on request - version “Wx” - cooled by water in open circuit) Dimensions: Cm 130 x 91x...
Open the catalog to page 3SERIES STANDARD “DISTATIC” Model Explosion proof version ATEX approved For recycling of flammable and not flammable solvents Loading capacity: 160 litres Total volume of the boiler: 222 litres Inner diameter of the boiler: 500 mm Processing time: hours 4,00 - 5,30 Working temperature: 50 - 180 °C Operating: atmospheric pressure Voltage: 400 V - 50 Hz Electrical supply: three phases + earth Connected power: 11200 W Electrical protection: II2G IIA T3 to T2 Vapour condenser: stainless steel – cooled by air (on request - version “Wx” - cooled by water in open circuit) Dimensions: Cm 152 x 115 x...
Open the catalog to page 4ADDITIONAL “REC BAG” Bags for Distillation Residues The use of “Rec Bag” allows achieving a high concentration of solid contaminants (paints, pigments, resins, polymers, inks, etc.) with a consequent higher distillation yield. It means to get a process residue with very low solvent contents; this residue, contained inside the bag, is easy and quick to discharge, avoiding any contact with sludge and any cleaning of the boiler. RecBag 60 – 120 - 160 litres OPTIONAL Easy loading of the polluted solvent to be treated set by pushbutton with level control. Loading by Pneumatic pump or exploiting...
Open the catalog to page 5All FORMECO S.R.L. catalogs and technical brochures
-
WATER EVAPORATION UNITS
8 Pages
-
DiQ 30/60/120
5 Pages
-
Di 15, Di 30
4 Pages