- Catalogs
- FORMECO S.R.L.
- Di 15, Di 30
Di 15, Di 30
Di 15, Di 30
- Model Di15 Ax LCD: Loading capacity of 15 litres, total boiler volume of 19 litres, inner diameter of 240 mm, processing time of 3.5 to 4.5 hours, working temperature range of 50 - 180 °C, operates at atmospheric pressure, voltage of 230 V - 50 Hz, connected power of 1040 W, and dimensions of 55 x 65 x 165 cm with a weight of 67 kg.
- Model Di30 Ax LCD: Loading capacity of 30 litres, total boiler volume of 43 litres, inner diameter of 320 mm, processing time of 3.5 to 4.5 hours, working temperature range of 50 - 180 °C, operates at atmospheric pressure, voltage of 230 V - 50 Hz, connected power of 2040 W, and dimensions of 60 x 99 x 116 cm with a weight of 142 kg.
- Explosion proof version with ATEX approval for safe operation in hazardous environments.
- Vapour condenser made of stainless steel, cooled by air, with an optional water-cooled version.
- Electrical protection rated II2G IIA T3 to T2.
- Rec Bag: Disposable bags for distillation residues, available in 15 and 30 litres, facilitating easy disposal of solid contaminants.
- Bull’s Eyes with Wiper: Allows inspection and additional loading without opening the cover.
- DIstatic: Distillation units with tilting boilers for residue unloading.
- Di: Explosion proof units for flammable and non-flammable solvents.
- Ax: Air condenser with stainless steel construction.
- LCD: Control board with liquid crystal display for time regulation.
Catalog excerpts
SOLVENT RECOVERY SYSTEMS Professional Formeco s.r.l. Via Cellini, 33 35027 Noventa Padovana Padova – Italy – www.formeco.com
Open the catalog to page 1
Model Di15 Ax lcd Explosion proof version <|x) ATEX approved For recycling of flammable and not flammable solvents Loading capacity: 15 litres Total volume of the boiler: 19 litres Inner diameter of the boiler: 240 mm Processing time: hours 3,30 - 4,30 Working temperature: 50 -180 °C Operating: atmospheric pressure Voltage: 230 V - 50 Hz Electrical supply: single phase + earth Connected power: 1040 W Electrical protection: II2G IIA T3 to T2 Vapour condenser: stainless steel - cooled by air (on request - version “Wx” - cooled by water in open circuit) Cover gasket: standard Dimensions: cm 55 x...
Open the catalog to page 2
SERIES STANDARD “DISTATIC”Model Di30 Ax LCD Explosion proof version (Ex) ATEX approved For recycling of flammable and not flammable solvents Loading capacity: 30 litres Total volume of the boiler: 43 litres Inner diameter of the boiler: 320 mm Processing time: hours 3,30 - 4,30 Working temperature: 50 - 180 °C Operating: atmospheric pressure Voltage: 230 V - 50 Hz Electrical supply: single phase + earth Connected power: 2040 W Electrical protection: II2G IIA T3 to T2 Vapour condenser: stainless steel - cooled by air (on request - version “Wx” - cooled by water in open circuit) Cover gasket: standard Dimensions:...
Open the catalog to page 3
ADDITIONAL “REC BAG” Bags for Distillation Residues The use of “Rec Bag” allows achieving a high concentration of solid contaminants (paints, pigments, resins, polymers, inks, etc.) with a consequent higher distillation yield. It means to get a process residue with very low solvent contents; this residue, contained inside the bag, is easy and quick to discharge, avoiding any contact with sludge and any cleaning of the boiler. RecBag 15 litres OPTIONAL BULL’S EYES WITH WIPER Couple of bull’s eyes with wiper for easy inspection inside the boiler during the distillation process and allowing a second...
Open the catalog to page 4All FORMECO S.R.L. catalogs and technical brochures
SOLVENT RECOVERY SYSTEMS5 Pages
WATER EVAPORATION UNITS8 Pages
DiQ 30/60/1205 Pages