^ forecr Cost-effective carrier board based on NVIDIA Jetson Nano and Xavier NX processor modules for edge analytics. HIGHLIGHTS I Supports NVIDIA Jetson Nano and Xavier NX SOMs I AI ready for edge analytics and multi-stream deep learning applications I 4K Video Display (HDMI 2.0) I Industrial IO options (RS232/485, CAN Bus, Digital I/Os) I Rich extension options (M.2 Key E, M.2 Key B, M.2 Key M) I High Speed Interfaces (Gigabit Ethernet, USB 3.1) I Robust power design I Wide voltage input range I Extended temperature range I Ideal for size and power constrained systems I Robust design for 7/24 operation Supported Modules NVIDIA Jetson Nano NVIDIA Jetson Xavier NX NVIDIA Jetson TX2 NX Extension 1x M.2 Key B (USB 3.1 only) Sockets 1x M.2 Key M (PCIe Gen4 x4) Graphics Interfaces1x HDMI 2.0 (max resolution 3840x2160) Internal Mass 16 GB eMMC 5.1 Flash Interfaces 1x Gigabit Ethernet 2x USB 3.1 Type-A 1x CAN Bus (No available in Jetson Nano) 1x RS232/422/485 (software configurable) 2x microUSB 2.0 (Debug/Recovery) Isolated Digital IO (3 OUT / 2 IN) Form Factor / Dimensions 100 mm x 100 mm Communication by extension sockets Operating Systems Ubuntu Linux 18.04 © 2020 - Forecr.io | All data is for information purposes only | Subject to change without notice | DSBoard-NX2_EN_Rev01

Power, Reset Buttons NVIDIA Jetson Nano / Xavier NX SOM CANI/O Expander HDMI Connector Onboard DC/DC Converters Power Connector DSBOARD-NX2 with NVIDIA Jetson Nano SOM module and passive heatsink DSBOARD-NX2 with NVIDIA Jetson Xavier NX SOM module and passive heatsink DSBOARD-NX2 with NVIDIA Jetson TX2 NX SOM module and passive heatsink Forecr Ankara Teknopark TGB Yerleskesi 2224.cad. No:1 F215/216 | 06378 | Yenimahalle / Ankara / TURKEY Tel.: +90 312 484-8576 | [email protected] www.forecr.io © 2020 - Forecr.io | All data is for information purposes only | Subject to change without notice | DSBoard-NX2_EN_Rev01...