Siegling - Belting Splicing Equipment
16Pages

Splicing equipment Contents Preparation tools – Splitting/peeling – Punching timing belts Splicing tools – for bonded splices – for melt splices – for timing belts – high-quality equipment with all the accessories; – a wide range of services (leased tools, repair service…). Forbo Movement Systems provides detailed splicing instructions specific to the process and material concerned. Siegling – total belting solutions Müssel Maschinenbau GmbH Reichelsweiherstrasse 8 D-95615 Marktredwitz www.muessel.com – special splicing tools Development, manufacture and sales by: – tool and assembly sets By working closely with Forbo Movement Systems Müssel Maschinenbau GmbH has developed innovative and practical equipment for all splicing methods. The tools complement one another and guarantee efficient and dura

Splitting/peeling preparation tools Portable tools for splitting, peeling or bevelling belts in a wedge shape. With adjustable drive rollers, depth stops and tempered blades. PS-PM-110/V; splitting and peeling machine Areas used – for all conveyor and processing belts to be made endless with wedge, overlap and Z-splices (double, triple and multi-layer types as well as NOVO); PS-WD-70/V: Basic tool with table stand, blade retainer, blades and setting gauge. Optionally available with drive motor. – for unlimited belt widths; – belt thickness regardless of type to 7 mm max.; – can be used in...

Grinding preparation tools Portable tools, with or without drive motor for grinding belting material at splicing angles of 60° and 90°. Depending on type hand-held or with a grinding shaft with bearing. PG-GM-V/130 (without drive motor) Areas used – wedge-shaped grinding of belts and belt ends; PG-HG-V/V: Hand-held grinding tool without brush. – belt thickness of 8 mm max.; – belt widths up to 130 mm or 230 mm (tool) or unlimited (hand-held); – can be used in all industries/segments. Accessories required PG-GM-V/130: Grinding machine without wedge segments. Available optionally with drive...

Punching preparation tools Manually operated punching presses with replaceable sets of punching blades for different types of Z splices. For belt widths up to 150 mm with fixed belt-edge depth stops, hold-down bars and replaceable punching bases. For belt widths up to 1500 mm max. with adjustable punching head and toothed section. Areas used – for preparing Z splices and Z overlap splices depending on type; PP-HP-35/V; PP-HP-70/V; PP-HP-110/V: Hand-operated cutting block including blades without stencils. – belt thicknesses depend on type up to 6 mm max.; – belt widths depending on type; –...

Punching preparation tools Hand-operated punching presses Type designation PP-HP-35/V Hand-operated cutting block Technical info Dimensions (L x W x H) [mm] 170 x 80 x 15 Weight [kg] 0.4 Maximum belt width [mm] unlimited Maximum belt thickness [mm] 4 Splice angle 90° Splice type Z 35 x 11.5 Punching presses width ≤ 150 mm Type designation PP-ZP-V/40-3 PP-ZP-V/80-3 PP-ZP-V/80-6 PP-ZP-V/150-6 Manual Manual Manual Manual Z-punching press Z-punching press Z-punching press Z-punching press Technical info Dimensions (L x W x H) [mm] 185 x 205 x 265 290 x 200 x 250 440 x 210 x 360 500 x 210 x 360...

Preparation tools for punching timing belts Manually operated timing-belt punching presses for preparing 70 x 11.5 mm Z splices on timing belts and flat belts for belt widths of 150 mm max. The following standard timing belts can be punched: T5, T10, T20, AT5, AT10, AT20, HTD8M, HTD14M, L and H. Areas used PP-ZP-V/80-10-Z; PP-ZP-V/150-10-Z: Manual Z-punching press incl. steel punch-cutting plate, hold-down bar for timing belts, sets of profile guide rails (T5, T10, T20, AT5, AT10, AT20, HTD8M, HTD14M, L, H), punching set 70 x 11.5 left and right, 1 set of blades, screwdriver and side...

Bonded splice tools Heating presses with heating on one side for bonded splices. The top of the heating presses includes a control light and a thermostat to regulate the temperature of the heating platens. A hold-down bar that can be removed on one side is integrated in the bottom of the press. Areas used – for bonded splices with heating on one side and temperatures adjustable to 110 °C; SB-HP-120/50: Heating press with integrated thermostat incl. thermometer, heat-resistant film, soft pad and pressure equalising metal sheet. – for belt widths depending on type between 50 mm max. and 1000...

Melt splicing tools Heating clamps with heating on two sides for melt splices. The temperature can be adjusted variably using a temperature switch or with a set target temperature. The surface pressure is generated via a tension lever or a thread (only SMX-HC-140/40). Simple and ergonomic to handle with splicing guides in different widths. Areas used – for all melt splices; with heating on both sides and temperatures adjustable to 210 °C; SM-HC-…/…: Heating clamp without splicing guides, clips and cooling clamp. Available as: – for belt thickness between 0.5 and 3 mm, depending on type also...

Melt splicing tools Type designation SM-HC-50/40 SM-HC-50/60 Heating clamp type V Heating clamp type F Heating clamp type V Heating clamp type F Technical info Dimensions (L x W x H) [mm] 220 x 60 x 100 230 x 100 x 100 Length of heating platens [mm] 50 50 Maximum belt width [mm] 40 60 Maximum belt thickness [mm] 0.5 to 3 0.5 to 3 Weight [kg] 1.8 1.8 Voltage [V] 230/110 230/110 Capacity [W] 2 x 80 2 x 100 Heating-up time to 190 °C [mins] approx. 4 approx. 4 Heating temperature infinite to 210 °C constant 190 °C infinite to 210 °C constant 190 °C Splice max. Z – 35 Z – 35 Type designation...