EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) siegling prolink modular belts SERIES 3 Straight running belts Pitch 50 mm (1.97 in) Prolink Engineering Manual · 12/2017

siegling prolink modular belts Straight running belts l Pitch 50 mm (1.97 in) Belts for medium-duty food applications Side view scale 1:1 Available surface pattern and opening area S3-0 FLT Closed, smooth surface 50 (1.97) S3-16 FLT Open (16 %), smooth surface Design characteristics – Hinges that open wide, combined with smooth, flat channels on the underside provides an easy-to-clean belt design S3-0 LRB Closed surface with lateral ribs – Open egde design for unhindered drainage S3-16 LRB Open (16 %) surface with lateral ribs Basic data Pitch Width increments 20 mm (0.8 in) Hinge pins Made of...

Straight running belt | Pitch 50 mm (1.97 in) Closed, smooth surface | Flat top surface Belt dimensions dpin Made to order belts BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies with (EU) 10/2011 and (EC) 1935/2004 regulations regarding...

Straight running belt | Pitch 50 mm (1.97 in) Open version (16 %) for excellent air circulation and drainage | Smooth surface Variant specific dimensions [mm (in)] Belt dimensions dpin Made to order belts UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31...

Straight running belt | Pitch 50 mm (1.97 in) Closed surface | Lateral ribs for better grip in small inclines and gentle conveying of delicate products Variant specific dimensions [mm (in)] Belt dimensions dpin UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with...

Straight running belt | Pitch 50 mm (1.97 in) Open lateral rib version (16 %) for excellent air circulation and drainage | Lateral ribbing for better grip in inclined conveying Belt dimensions dpin UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31...

Straight running belt | Pitch 50 mm (1.97 in) Main dimensions Sprocket size (Number of teeth) Shaft bores (• = Round, ■ = Square) 25 mm Material: POM, Color: UC UC (Uncolored) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off.

Straight running belt | Pitch 50 mm (1.97 in) Flat top surface for dry products BL (Blue), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

SERIES 3 | SIDE GUARDS siegling prolink modular belts Straight running belt | Pitch 50 mm (1.97 in) S3 SG | Side guards For retention of bulk products Recommended running direction Basic data Height (h) Material All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 “Temperature influence“. T Temperature All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information.

i Series S1 ... S14 a Open area/Sprocket size p- 'I' -lilag- ■ 'I ■■ 'M ii' '■ I Format: xx E.g. 20 = 20 % I oi spun kels: numbei of teeth I oimal: "/"xx E.g. /12 = 12 teeth s Height/Diameter/ Bore size and style Height in mm Format: Hxxx pin diam-l-i in mm I o'l mat Dxxx Bore size: SQ (= square) or RD (= round) either in mm ■ t in he -• Format: SQxxMM or RDxxIN 1 Length/Width Pins Length in mm I or map I /// M/'dul- e width in mm I mmaP W/// * For each series' standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on request....