Series 2
12Pages

EXCERPT FROM PROLINK ENGINEERING MANUAL 12/17 (Ref-No. 888) siegling prolink modular belts SERIES 2 Straight running belts Pitch 25 mm (0.98 in) Prolink Engineering Manual · 12/2017

siegling prolink modular belts Straight running belts l Pitch 25 mm (0.98 in) Belts for light-duty food and container handling applications Side view scale 1:1 Available surface pattern and opening area S2-0 FLT Closed, smooth surface Design characteristics S2-0 FRT1 Closed surface with friction top – Hinges that open wide provides an easy-to-clean belt design – Low belt weight reduces energy consumption – Open edge design on flat top versions for unhindered drainage and closed edge design on grid top and raised rib versions S2-12 FLT Open (12 %), smooth surface Basic data S2-57 GRT Open...

Straight running belt | Pitch 25 mm (0.98 in) Closed, smooth surface | Flat top surface Belt dimensions dpin BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies with (EU) 10/2011 and (EC) 1935/2004 regulations regarding the raw...

Straight running belt | Pitch 25 mm (0.98 in) Open version (12 %) for excellent air circulation and drainage | Flat top surface | Smooth surface Variant specific dimensions [mm (in)] Belt dimensions dpin UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA...

Straight running belt | Pitch 25 mm (0.98 in) Closed surface | Friction top provides increased grip Belt dimensions dpin TQ (Turqouise), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with FDA 21 CFR 31 Complies with (EU) 10/2011 and (EC) 1935/2004 regulations...

Straight running belt | Pitch 25 mm (0.98 in) Large open area (57 %) allows minimal product contact | For excellent air circulation and drainage | Grid top surface Made to order belts ■ BK (Black), ■ BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Flex radii: r1 = side flex, r2 = front flex on roller, r3 = back flex on load bearing roller, r4 = back flex on Hold Down shoe, r5 = back flex on roller 21 Complies with...

S2-57 RRB | 57 % Opening | Raised rib Large open area (57 %) for excellent air circulation and drainage | Raised ribs for minimal product contact and smooth product transfer using finger transfer plates Belt dimensions dpin Available standard materials41 Belt Made to order belts PE PE 3 206 4.3 0.88 -0.2 -70/65 -94/149 BL (Blue), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. 11 Flex radii: r1 = side flex, r2 = front...

Straight running belt | Pitch 25 mm (0.98 in) Main dimensions Sprocket size (Number of teeth) Shaft bores (• = Round, ■ = Square) 25 mm Material: POM, Color: UC UC (Uncolored) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off.

Straight running belt | Pitch 25 mm (0.98 in) Flat top surface for dry products BL (Blue), ■ GN (Green), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

Straight running belt | Pitch 25 mm (0.98 in) Open version (57 % base module) for good drainage Basic data Type BL (Blue), UC (Uncolored), WT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

Straight running belt | Pitch 25 mm (0.98 in) For retention of bulk products Recommended running direction BL (Blue), DWT (White) All measurements and tolerances apply at 21 °C; for temperature deviations please see Prolink manual chapter 4.4 "Temperature influence". All imperial dimensions (inches) are rounded off. Note: Use of accessory in a belt may impact on the minimum design radii. Please see chapter 6.3 for further information. MOVEMENT SYSTEMS

i Series S1 ... S14 a Open area/Sprocket size p- 'I' -lilag- ■ 'I ■■ 'M ii' '■ I Format: xx E.g. 20 = 20 % I oi spun kels: numbei of teeth I oimal: "/"xx E.g. /12 = 12 teeth s Height/Diameter/ Bore size and style Height in mm Format: Hxxx pin diam-l-i in mm I o'l mat Dxxx Bore size: SQ (= square) or RD (= round) either in mm ■ t in he -• Format: SQxxMM or RDxxIN 1 Length/Width Pins Length in mm I or map I /// M/'dul- e width in mm I mmaP W/// * For each series' standard colors please refer to the table of materials for each belt (chapter 1.2). A number of other colors are available on...